Acquisition of interior doors is complete without the appropriate accessories.Along with handles, chains, eyes, and various inserts manufacturers are making kits loop.Perhaps this is the main element of the door set, which determines the quality of the canvas in the opening fixing.Commonly used traditional patterns of loops, the device assumes that the sidebar to the array - it is formed by a groove.
Development of technological methods of manufacture and installation of doors led to the development loop "Butterfly", which does not require a frame.New hardware has other fundamental differences, which are characterized by both pluses and minuses.Proper installation will preserve the advantages and minimize the disadvantages of the finished door design.
Design features
main difference hinges butterfly, which influences the characteristics of installation further operation is fit for the door surface.This hardware does not require a slot for inserting - buttonhole map superimposed on the surface and also twists.Parties attachment are arranged so that one part when you close the door is embedded in the other, and this is due to the name of the "butterfly".The number of screws varies, depending on the set, but on average, corresponds to the classic set mortise hinges.
installation process
To understand how to set the loop tie properly, you need to consider further its structure.Technology installation of overhead models, as noted above, due to the specifics of their work.No need for the formation of the grooves is a significant advantage of these loops in the rest of the course of the installation corresponds to the usual procedure.
first location is marked loops.It is desirable to apply their inner side, whereupon a fixed point of drilling.The gap from the edges of the web must be at least 200 mm - average indent, not only for a loop "butterfly", but also for the regular version of the hardware.Then made a neat hole for self-tapping screws, which are usually supplied with hinges.The final touch will be a direct screwing parties "butterfly" to the door frame and the canvas.
Nuances installation
external ease the installation process, and in particular the absence of the need to create an array of niches in many bribes.But all the advantages that hinges "butterfly" and on this end.Only after the installation, you can assess how ambiguous such supplies.
fact that to get the proper effect of the use of loops without tapping can only be provided flawless installation.Compared to conventional models, "butterfly" do not provide a wide field for completion.Firstly, the parties should ideally take shape, or form an uneven - the door will spring back, or at least, loose fit.Second, have to put up with a small gap, which is naturally formed by bulging the loop cards.And another unpleasant moment, which also characterizes the door hinges "butterfly" design without tie and as such - it is impossible to remove the door leaf without unscrewing screws.
How to fix the error?
Get rid of all of the implications of such a loop can not be original, but to minimize their impact on the ease of operation can be.Among the most important problems to be solved during the installation wizard loops butterfly, is to ensure uniformity in the convergence maps.Usually inconsistencies are eliminated by creating pads.For this purpose, cardboard, thin chips, paper and similar material - underlay necessary in the part opposite the side which is not superimposed.
addition, hinges for doors, "Butterfly", by virtue of their design features do not provide a high degree of reliability.Of course, everything depends on the product, but the hinge mortise type, they are inferior.Therefore, it is important to perform the maximum quality itself fixing screws - no peeking hats and slopes at the sidebar will be reflected in the reliability.
Another questionable aspect is the location of the screws on the map.On one side, they are arranged closely, and on the other - at a distance from each other.The configuration can not be fixed, but you can eliminate the possibility of damage to the door, which is planned to strengthen the loop "Butterfly."Installation is carried out in the areas of solid and reliable - that is suitable for tightening.
Which doors fit?
Determine the appropriate segment of the optimal design of a door hinge butterfly can be based on the strength of the attachment.This nuance has been considered, and it is quite natural that such systems complement the heavy model is undesirable.All the same operation introduction to the array adds a secure location while external fixation without insurance seems very risky when installing 40-killogramovogo web.
contrast, the door hinges "butterfly", installation of which is carried out as smoothly and cleanly, ideal for lightweight doors that will not require too much effort to install.In particular, representatives of veneer categories combined with "butterflies" are not only technically, but also visually.Models made from an array, it is recommended to equip the mortise fittings - the complexity of the installation is compensated by their reliability.
decorative effect
Invoice loop fastening system "Butterfly" and is due to aesthetic considerations.No matter how accurate was no tie-master will fail in the same way as to preserve the integrity and completeness of the decorative door.Bypassing all the complexity of the installation of such loops, you can achieve excellent results.Since there is no need to interfere with the capricious laminated surface, door hinges, butterflies should be considered as the best option for living rooms, bedrooms, offices and other premises where important stylistic harmony.
Total
overhead loop is hardly the best choice for amateurs and beginners, who can count on easy installation without creating a tie.Some risks are eliminated, but there are others.However - subject to strict marking and accurate convergence cards - loop "Butterfly" will provide results in the form of aesthetic interior doors with original mounting configuration.Finally
should refer to the mortise models, which still remain the most popular solution for fixing doors.This option is worth doing if you need robust and reliable design, however, will have to sacrifice decorative.Still clumsy implementation of the principle of such loops is incomparable with the delicate lining without damaging the wood.
