Drywall, which have long been widespread in our market, especially good because it allows you to create a completely different geometric shapes and turn their homes into amazingly beautiful place.
Often masters and designers use in the design of houses and apartments curly plasterboard, which is relatively easy to install, but makes absolutely irresistible impression.Just below, we will tell you in detail about how all this is done.
total list of works
order to work goes, it is very important to outline her plan itself.That's about the sequence of the actions by which you and create your own curly plasterboard (those photos you'll find in abundance in this material).But let's not get distracted:
- first measured "native" ceiling, pretend to be the size of each part of the hinged cover.
- study options, photo.At this stage, it is desirable to adequately imagine what it is you can make curly plasterboard with their hands.Do not overestimate your strength!Better to start with simple shapes and small rooms.
- Then you need to determine the sequence in which you will mount the levels.
- According to the scale of the room carefully calculated amount of material.Purchase all the required volume (with a margin of at least 10%).
- If the ceiling has a large potholes and bumps, it makes sense to fix the mounting grid on it and re-plastered.
- done counting suspended ceilings.
- assembles power frame.
- It laid in advance all the necessary communications.
- again made measurements of the finished frame, then made a pattern in which all cut and shaped parts.
- Produced trim frame plasterboard.
- Mounts all lighting fixtures, made final finishing ceiling coverings.
preparation and marking
First of all you need to prepare the "native" ceiling and walls.Necessarily it is necessary to completely remove the collapsing cornices plaster: being pretty massive, they can break through the curly plasterboard, so that all your work will come to nothing.Of course, it is necessary to dismantle the lighting and surface clear of foreign objects such as nails driven into.
First you need to determine the height of the first, the lower the level of your tiered ceiling.Experts say that it should be at least 25 mm below the lower level of the main ceiling, as this volume will occupy himself plasterboard and profile to which it is mounted.You find that point and make a noticeable markings on the wall, which will then be guided.
using water or a laser level, carry the marks on all the walls, connecting the pencil marks.However, professional installers used for this purpose thread of paint (or choklayn "scientifically").To make a mark with it, hold the thread between two fingers that bend and abruptly let go.
Seven times measure ...
Finally once again make sure to do your markup is really accurate, and its lines are no blunders.Attention!By building shaped plasterboard with their hands, always pay particular attention to is the accuracy of the measurements: if you treat this matter negligent, the whole structure may be skewed, which clearly does not add beauty to your housing.
And now you need to find in the corner of the room, which is closest to the mark of 90 degrees.From it makes a mark on the wall every two feet.On the opposite wall, repeat the procedure using a laser level for accuracy.Take choklayn and line marks the line between the right to the ceiling.Then you mark the location for mounting the suspensions, which will be attached to the ceiling profile.What
required supplies?
order not to be trapped in the middle of the operation, we recommend that you familiarize yourself with the list of required supplies that you do not just need to mount the ceiling:
- UD-profiles (PPP 27h28).The name stands for "Ceiling guide profile."
- CD-profiles (PP 60h27).This is a common longitudinal profile.
- «crabs."Clamps for interconnecting frame members.
- suspension for suspension profile to the "native" ceiling coverings and their subsequent alignment.
- Screws metal 3,5h11 or 3,5h9 for connecting frame members among themselves.
- Screws metal 6h60 fitted with anchor dowels.Needed for the mounting frame directly to the ceiling.
- Self MN25, which is screwed to the drywall profiles.
And more.In that case, if you make curly plasterboard in the hallway or another room, which is characterized by increased noise, it is strongly suggested to provide for the purchase of a noise insulation material!
mounting frame Tier
Along the perimeter anchoring UD-profile.It follows that its lower part was held strictly by a broken line you.If it turns out that you bought your profile no holes for fasteners, drill them yourself (again every half a meter).Fixing is best done by means of plastic dowels and screws, so once they are able to maximize the strength of the concrete surface (the most common option).It is best to use anchors with a diameter of about 6 mm.
Fixing Profile
now required to fasten the ceiling U-shaped pendants, using pre-punched to orient your lines.Plugs desirable to use all the same.Important!Between themselves suspensions, it is desirable to maintain a distance not exceeding 60 cm. This is especially important if you mount shaped plasterboard in the kitchen.
fact that in this room the ceiling is often account for a large load: humid air, attachments and more.We do not recommend to save on supplies in such an important matter!
little bit about the kitchen
useful advice.Optimally suited for suspensions flared plugs, but if those in the store simply was not there, it is acceptable to use shock fasteners, simply taking them more relevant to your needs screws.This is especially important in the case when you figured plasterboard in the kitchen.Photos do not convey all the nuances, but you just have to keep in mind one thing.
The fact that the air of the room is almost always characterized by high humidity.Plasterboard may eventually get wet and greatly increase your weight.If the attachment will be weak, all ceiling coverage is not one day may simply collapse on your head.
Why we recommend using it flared plugs?The fact is that in the concrete ceilings of domestic houses you will inevitably stumble upon various cavities.Cap these fasteners will not allow them to fall into them, providing the most reliable, high-quality mounting.
And one more thing.It is very important when connecting hangers do this using no external "ears", and the internal openings as tabs under the weight of the ceiling will inevitably draw it out, and quite significantly.All your curly plasterboard, installation of which had so carefully and responsibly work immediately would be completely distorted.
Installation CD-profile
Once you're done with the suspension, measure the required length profile CD and gently insert it into the UD-attachment that you have previously secured around the perimeter of the room.To expose them as accurately as possible, you can use ordinary thread.
pulls it precisely across the CD, gently twine is attached to the ends of the profiles UD.To slightly droops profiles are not delayed thread, slightly fix them, head for them tips suspensions.By the way, the thread can then be removed, as it still is useful when installing the ceiling of the second level.
Gently 'calibrate' profiles in terms of twine, passing fixing them by means of small screws.Important!Before you start to attach sheets of drywall, be sure to make sure the thoroughness of his work.Also, do not interfere immediately to lay the wiring for recessed luminaires, stretch cord phone, TV and Internet bonded.The cavities that form a shaped plasterboard, for that perfect fit.
fasten drywall
Standard sheet GVL has a length of exactly 250 mm.Pay attention!Each sheet must lie on the profile CD so close it exactly in half.The remaining space will be used for securing the next sheet GVL.Note that this stuff is very not easy, but because it is strongly suggested to work to find one or two assistants.
Here's how to do decorative ceiling drywall.Photos of these designs are available in this article, so before you start, you can get acquainted with them and come up with his own version, a great variety and originality.
How do the first level?
Of course, you must first mark the future shape of the ceiling.This is done using an ordinary pencil.As soon as the wall is planned for the level to which the second tier will lower your ceiling.Screwed profile UD.If you need to bend it figuratively, to facilitate the process just notch stuff every five centimeters.
should know that you need to cut the profile to the side and the outer side of the direction in which the surface and will bend.That's the way to do the first level by mounting curly plasterboard with their hands.Photos of the article will help you understand some of the nuances of the work.
Then you can begin to collect the frame, fastening it between a self-tapping screws of the appropriate type.Then gently fasten sheets of gypsum fiber board.Try guide screws vertically, as otherwise the surface of the sheets will inevitably chip!As we have already mentioned above, it is possible to pull the same thread, to use it to achieve maximum accurate alignment.
figured second level
Since the field winding lines attach pieces of drywall difficult, we recommend to cut it into small pieces, which are much easier to bend, giving them the desired shape, and strengthen.At this stage, the installation of plasterboard ceilings curly extremely important to maintain the most accurate and not to hurry, because otherwise you risk to spoil the results of their work.
If in some places the profiles are suspended for more than half a meter, they must be additionally secured with the help of suspensions.Only then they can be neatly sewn pieces GVL constantly cropping unwanted parts ordinary hacksaw.Vertical stripes plasterboard (before bending) should be notched on the outer side of the bend.Once this work is finished, you can start putty ceiling.
If you do not have sufficient experience in the installation of false ceilings of gypsum board, it is strongly suggested first fully assembled frame, and only then to bind the two sheets of gypsum fiber board level.So much easier to avoid mistakes.That's made Suspended curly plasterboard ceilings.
