At the present time, every person who wants to change his residence, can realize their dreams through the use of modern materials.And there is such a variety of them, enough to make a sketch of an appropriate and enlist the support of a specialist.But if you set out to carry out repairs on their hands, should carefully examine the material selection and review their properties.Consider profiles for plasterboard kinds of fasteners and is what it is.
What is the profile
Lately, you will notice that almost all construction interior decoration consist of plasterboard.This septum may be shaped, straight walls, ceilings, etc. multilevelBut sheets of drywall can not be secured without retaining bases, which is a metallic profile.Of course, some builders try to replace it with wooden beam, but this option is a short-lived: the tree is able to bend, deform, change its size at differences humidity.It is subject to decay and destruction of insects.All types of metal profiles for gypsum board do not swell, do not change the size and, thanks to the zinc coating does not corrode.Also on the shelves of the profile can make cuts, after which it will be curved at the desired angle, which will allow for the installation of structures most unusual forms.
What are the types of profile for drywall
There are a variety of profiles for plasterboard, which are different types of characteristic and its purpose.It is necessary to consider the most popular metal base and find out what they are used:
- Ceiling bearing profile (PP-60 or CD-60).It is used in the manufacture of various decorative elements, includingand falshsten.
- Rack profile, called the primary (CW-50).It is used for the installation of partitions, which are made of a thin plasterboard.
- guide profile view (UD-27) for CD-60.Most often it is used in the manufacture of shelves, slopes, niches, multilevel ceilings and arches.
- partition profile (rack) CW-100 is used in the manufacture of partitions with a minimum (125 mm) thickness.
also distinguished profiles for gypsum board, which also marks the kinds of UW-50.They are used as guides for the CW-50.
How to choose
When purchasing building materials should be guided by the rule that the profiles for plasterboard (species which are very diverse) differ in their characteristics and purpose.Since the bearing capacity of structures depends on the thickness of the metal is not recommended to use the profile thickness of 0.4 mm.Due to unsatisfactory hardness it is used in the work is not related to the installation of drywall constructions.The profile of an economy version is considered to be a product thickness of 0.45 mm.Substrate with such rigidity is not only durable, but also affordable.Strengthening considered profile with flange thickness 0,55-0,6 mm.It is suitable for installation of structures of any type, but is a bit more expensive.
