If you have decided on a new acquisition in the form of a ring, do not forget to start to determine your perfect size, so as not to be disappointed.If suddenly you still do not know how to determine the ring size - we will try to tell you.
including the size of the ring is called the diameter of its inner surface in millimeters.
The easiest and surest way - to enter into any jewelry store and ask her employees measure up the volume of your fingers.Believe me, they will gladly help you.Especially if you are sure that you are there made his purchase.
Such measurements best to do at least three times.It certainly will give an accurate result.Why three times?It is simply the volume of the pin can be changed three or four times during the day and is primarily depending on the time.
Now you know how to determine the size of the ring on your finger, and you can use this method.If you are not interested in it, and we can offer the following options.
When desirable to determine the size of the finger:
- morning - still present in the body after a night of water, as a result, the fingers slightly swollen;
- During menstruation - they may also be slightly swollen;After
- sports (the same reason);
- In too cold (or hot) weather.
How to determine the ring size, "final fitting»
final fitting should be conducted at a time when you are most relaxed, calm, and your body temperature is correct.It will surely allow you to choose the most optimal size.By the way, you can simply purchase an inexpensive ring (eg, silver) and carry it for some time.This will give you a check whether its size and diligence are convenient for you.
Now I want to introduce you to the most famous and accurate method to help understand how to determine the size of the ring.In order to use them in full must be reserved by the respective images, to verify compliance with the scope (through normal line), and patience.
Thus, the method of the first
Ring must be put on the circle, the most suitable size of your finger.To get started is to make sure that the line is not outside of the ring, but inside.If you need to decide between two sizes, it is best to choose a larger one.
way, the template for such measurements, you may well make yourself:
- 50 cents is equal to 19.5 mm;
- 5 cents equals 18.5 mm;
- 10 cents is equal to 17.5 mm;
- 1 penny equals 15.5 mm.
Fringe coins need to rub a pencil slate or, alternatively, a coin can be put on a sheet of paper and rub the surface.The paper was then recommended to strengthen (the pattern pasted on a sheet of cardboard), needed to cut a circle using stationery knife and make a coin in order to validate the cut.Here's a template and ready.
Now you know how you know your ring size using one method is to start reading the following.
second method you need to find a piece of string or any non-tensile threads (also suitable paper shirinok 4 mm).It needs to wrap around your finger.This must be done tightly enough, however, not to overdo it.
Next, we should take a pencil and mark a point on a string where a match occurs.Threads with notes attached to the normal range and find your size.Choosing between the two, you need to choose the volume a little more.
And finally, the third method
Begin measurement by this method to printing and cutting dimension of the tape loop.Then on the line should be slotted, twist circle and ordinary wear tape on his finger (the pull tab so that the paper itself to lay plump fingers).Last number on the scale will be your ring size.
Now you know how to determine the size of the ring, and we hope that you do it right!
