After a long use of the smartphone in some cases it is necessary to conduct the firmware software.This will help speed up significantly upgrade, several varieties of functions of the device (depending on the type used by the firmware).Galaxy S3 - one of the most popular smart phones of its time.However, not all owners know how to flash the Samsung Galaxy S3.
Things to consider before starting the firmware?
To held software changes have benefited, you need to take into account the nuances of the following process.Before flash Galaxy S3, necessary to make sure that the battery-charged more than 50%.It is also worth considering that worn-out power supply can not hold the required amount of time the smartphone is turned on.Therefore, you need to carry out the firmware on a device with a good power supply.
Before you start making changes to the software should save all the files from the phone.This is due to the fact that they may be removed during installation of the firmware.In addition, to copy the required new files need a certain amount of free virtual space.About the phone book in your phone and do not forget, as there is a possibility of data loss.
Firmware Galaxy S3 can be performed by almost any smartphone owner who has the skills to work on a laptop.But it is necessary to observe all the rules of procedure.
software required
need the following programs:
1. Odin PC.
2. Recovery clockwork.
3. Firmware for Samsung Galaxy S3.
4. Drivers Samsung.
5. Set "Google" -based applications.
After all the software has been downloaded and installed, you can start to install the software.
What can interfere with your work?
Before you start, you need to hold off the antivirus program.This is due to the fact that some of the files that will be used by programs when you install the firmware, can be defined as the malicious Antivirus information.In this case, it will block the work programs.How to flash the Samsung Galaxy S3 with Antivirus on your computer, known to many users: to temporarily suspend defense or add folders and programs used in exclusion - ways to restrict the work of many such software.
After doing the above is not so difficult, but mandatory and extremely important conditions, you can continue the preparations for the installation of the firmware to your phone Galaxy S3.
Software Installation For the work needed drivers Samsung, which will allow to recognize the smartphone as well as software Odin PC.The process of installation is no different from the usual installation of utilities and software: you need to follow all the recommendations and select the necessary items.These programs are necessary and required to perform the intended work.In order to understand how to flash Samsung Galaxy S3 without them, you need to have a more in-depth knowledge in programming, and well-versed in the system phone.
Preparing your phone
To start the firmware software you need to switch your phone into Download Mode:
1. Completely turn off the phone.
2. Simultaneously press and hold for a while "Power" key, "Volume Down" and "Home".This key combination will launch a special menu.
3. After this, a warning will appear at which to press the "Volume Up".
4. You should see a green robot image in the center of the screen, that will mean the inclusion of the desired mode.
Performing this item is mandatory.Only in this case it is possible to make changes to the phone's software and prepare it for installation of the new firmware.This menu should appear when clamping vysheoboznachennyh keys on all the original machines of this model.
Installing Root rights to possible changes
To install Root-law, you need to run an installed version of Odin.In the window that appears, click «PDA», then we seek a file called «CF-Auto-Root», then you can connect your phone to a PC.When connected should light blue box ID: COM.If all goes well, you can press a virtual button «Start».Rutovaniya process usually goes quickly.Upon its completion should appear «RESET», and the phone will automatically restart in the mode change route-rights.Further, the smartphone must reboot in normal mode, and then you can disable it from your computer.Rutovanie you need to be able to modify the software that the manufacturer is prohibited.
Installation "rekaveri"
In order to fulfill this item, you must enter the smart phone mode Download Mode, by executing the above process.Then run the program Odin.Connect your phone to your computer again by original cable, press «Start».After completion of the phone should reboot.
Installing firmware
In this section you can directly learn how to flash Samsung Galaxy S3, as the previous action was only a preparatory stage.
whole process is divided into the following main points:
1. Turn on the phone.
2. connect it to your computer in the storage disk for data exchange.
3. Copy the firmware to the internal memory and a set of "Google."It is worth remembering that it is necessary to hold up all files.
4. Turn off the phone.
5. After a complete shutdown while we press and hold the "Power", "Volume" and "Home".
6. Once downloaded rekaveri need to do wipe.
7. Install the firmware as follows: recruit Install zip from sdcard and find the firmware recruit Install zip from sdcard and find a set of "Google."
8. Reboot your phone.
If the whole process was carried out correctly, you should see the animation download.In this mode, the device will boot with the new firmware.Sew Chinese Samsung Galaxy S3 without a set of standard software from the phone manufacturer is not possible, but such devices can find other firmware and how to install it.
If some of the above recommendations for the installation of the new software were not met, that is, the probability of loss of old software.Therefore, during the operation must be careful, because if you are installing the firmware has started, it must complete a mandatory basis.Otherwise, your smartphone will not run.
fifth generation
If you are the proud owner of Galaxy S5, we note that the process of firmware is not much different from the above.It is said that during the firmware user information (settings, as well as programs) are not removed - all that was found on a smartphone, and will remain there after the end of the firmware.Remember that if the firmware fails, the device can not be restored without the help of professionals.To avoid such problems, you must comply with certain conditions.First of all, you need to follow to ensure that your smartphone is fully charged.Then we check the wire, through which will be flashing on the performance.We show that the personal computer, with which the process will be the firmware is functioning correctly and does not issue "blue screens", does not go off, do not reboot.Carefully study the instruction, only then we begin the process of firmware.Computer UPS supplement that is able to work out with the blackout at least twenty minutes.
