Every year, diamond drilling and drilling concrete displace other technologies.For example, the punch has a number of disadvantages, in contrast to this method.This vibration, high noise levels, and so on. N. Most often this drilling is used during construction or repair work.Let's talk on the subject and see what are the pros and cons of diamond drilling.
Diamond: General
The main difference is that by using this technology completely absent shock loads and excessive vibration and noise.To achieve good results, using modern technology (diamond drills, special equipment to quench noise).During construction of the building is often required to make a deep hole in the concrete.If you use jackhammers, it is very easy to damage the structure, and it is fraught with consequences.Diamond drilling and drilling are characterized by high efficiency, allowing for a lot of work.But that's not all the benefits to which I would like to say.Let's talk about the advantages, which a lot of the technology.
Diamond drilling: advantages
One of the main advantages is that the customer can get the most accurate hole dimensions.This is very important, particularly for the installation works of high complexity.No dust - another fairly important factor.Sometimes they use hydraulic suppression, that is, ordinary water.As noted above, non-impact drilling method allows to achieve almost complete absence of noise.Processed metal and concrete structures do not experience destructive dynamic load, which prolongs life.Sometimes, using the same punch, or a jackhammer is almost impossible to make a hole for communication (mains water supply) in the building, and for the installation of diamond drilling is not a problem.Moreover, the hole will be perfectly flat and smooth, which is undoubtedly important.
about technology
Diamond drilling of concrete - is a complex process, during which use expensive technology, so this technology is considered unique in its own way.It is as follows.At the first stage of the future layout of holes.At this time, defined by their depth and diameter, and angle of inclination.Then there is just the process of drilling, which lasts 10-20 minutes, depending on the conditions under which the work is performed, and the size of the hole.With built-in cooling system installation is not too hot, which allows you to work uninterrupted and perform all in one go.Once again you should pay attention to the fact that the diamond crown - a high-strength product, so it is possible to drill a hole in any metal.
about your technique
process itself is fairly simple, but involves the use of special expensive equipment.In most cases, it is the diamond crown and a special rig.The device of the machine is quite simple.This includes hydraulic drilling apparatus.As is known, the use of cylinders with liquid, ie hydraulics to achieve maximum precision and smoothness of making holes.Sometimes an electric motor is used.When it comes to repairing the asphalt, the most commonly used two-stroke internal combustion engines (ICE).When the applied electric drilling rig, is selected as a single-phase installations and three-phase.The former are more preferable from a technical point of view, therefore, are more commonly used.Typically, the installation equipped with an air cooling system, their capacity - about 3 kilowatts.With regard to the three-phase systems, then they are used, but they have a big size and work from a network 380, which is available only at construction sites.
Conclusion
Today most of this technology for producing high-quality, accurate and smooth holes used for the installation of split systems.It is also possible to obtain hole anchor of any size in any foundation.High-quality diamond drills holes allows to obtain more than 200 millimeters.The price of such equipment may be of the order of 100 000 rubles.It should be noted that the resulting hole does not require further processing, ie polishing, adjustments and so on.. All this - saving not only money but also time and effort and the customer and the performer.Work such rigs in both open and indoors.Almost complete lack of noise makes it possible to use drilling in residential buildings during repairs or renovations.Here, in principle, and all you can talk briefly about this method of producing cylindrical holes of different diameter and depth.Of course, the high cost of quality pays off, and it is - an indisputable fact.
