When designing the data center there is a need for appropriate equipment: an active and passive network equipment.This article will focus on the selection of passive network equipment, and in particular the enclosure 19.
telecommunications closet 19 - this is the standard solution for data centers.By the standards of ANSI / EIA / TIA-569, there is a need in some areas for data centers and data centers - namely, not less than 6.5 square meters for each telecommunications room.It is not profitable for anyone who rents a room for your business.But come to the aid cabinets 19, which significantly saves the selected area and to protect the equipment from external influence.
What is the structure of the telecommunication enclosure 19?
main elements: the frame, side walls, doors, covers, guides.
All distances between holes directed to the relevant standards, so no special customizing is needed.To mount enclosure 19 need only a screwdriver.
The supply of telecommunication cabinet includes two pairs of rails mounted front and rear.They allow you to set more active equipment and fix it in several points.
most often in data centers buy cabinets 600mm wide, as they take up less space compared to the cabinet, having a width of 800mm.At the height of preferably all - cabinets in 42U (1U = 44,45 mm).In such cases, you can install a sufficient number of active and passive equipment, space savings.
To purchase the correct both passive and active equipment must be clearly understood: the dimensions of all the equipment, the number of cables laid in the closet, a dedicated area and height of the room.
What are the types of telecommunication cabinets?
Typically, cases are classified according to 19 beds: wall and floor.Wall cabinets have a small height and weight, therefore easily placed on the wall.Flooring is installed on the raised floor.In addition, there is a "middle ground" - a sliding tables, which are easy to fit into the office interior.For the convenience of consumers, many manufacturers produce special series cabinets.
Accessories for telecommunications cabinets
for proper distribution cable system, improve the safety and reliability of the active equipment to telecommunications cabinets supplied a whole line of accessories.
The most popular are considered cable managers (organizers).They allow you to organize the cable flows vertically and horizontally, to reduce the load on the cables and cords.
useful and indispensable in the IT sector thing - retaining clip.
For equipment that does not have a standard 19-inch mounting, there is a special mounting flange.
Brush cable gland to protect against dust, increase the efficiency of the cooling system and prevent the penetration of rodents in the closet.
blank panel increase the cooling efficiency when applying cold air.
Socles used for packing and storage of reserve cable.According to the requirements of cabling standards, the stock of the life of the cable should not less than 3 meters.
SUV (fan control) is necessary to maintain and control the desired temperature in the cabinet.It provides on / off fans and reflects the current temperature in the form factor.
overload and short circuit can protect the flow of electrical outlets mounted directly in the enclosure.
To increase airflow and improve cooling efficiency of active equipment used shelves with fans.
supply telecommunications cabinets 19
Depending on the series and size, telecommunication cabinets are delivered either assembled or unassembled.
Where to order telecommunication cabinets and active equipment?
you can make a comprehensive inquiry in one place - in the shop network equipment Lan Boxing: http://lan-box.ru.We have a wide range of different brands: http://lan-box.ru/vendors/.
regular customers and for design solutions we offer discounts, as well as our convenient delivery.Come, look - we will will be happy!
