Without papering the walls of wallpaper not imagine any one repair.To the results of your work has been optimized, you need to know about how to produce putty walls under the wallpaper.It will allow to achieve a perfectly flat surface of the walls, which will ensure a snug fit finishing material and significantly improve the appearance of your home.
What do I need for work?
need to buy primer deep penetration and filler itself.The latter is produced not only in dry, but also in the form ready for use.In addition, you will need a regular roll of foam rubber spatula and sandpaper, without which the finishing time would be incomplete.After preparing all the supplies and tools starts itself putty walls under the wallpaper.
methodology of work
First of all, you need as carefully as possible to remove old wallpaper.Liberally moisten the old wall covering with water, and if necessary steam the iron it.It is necessary to bring the old paper to such a condition, in which it will be easy to pry spatula and tear.
to putty the walls under the wallpaper was easier to work with a spatula from the bottom up, as in this case, less risk of damage to the surface.Considering that it is better to peel the wet coating, do not hesitate: how to soak a large area, we must try to remove wallpaper from it at once.
Before you start you should just finish how to treat the surface with primer and let it dry out a bit.If there is a major unevenness, large cracks and other serious defects, they need to plaster.He waited until the plaster is dry, sand the surface and re-apply primer.Now she begins filling the walls under the wallpaper.
first applied to the base layer.If you use the powder version, the plant should be filler, just follow the instructions.Experts say that the easiest way to get started with the top of the wall.
Taking a small spatula, scoop out a small amount of filler tank and place it on a larger tool.Put it to the wall, apply the putty economical and smooth movement from left to right.By moving the arm in the opposite direction, remove any excess material.Given the cost of plastered walls under the wallpaper from good producers (about 1050 rubles. 15 liters), this will save you a good idea.
Remember that the material should be applied so that the layers have found each other.For once you should not try to cover most of the walls, as you just smear filler without achieving a normal result.
have the floor technique of its application is somewhat different from the above.Slide a spatula only from below upwards, and as a movement similar to the substrate of the filler, and when you remove it surplus.
After all the basic works of the wall should be dry.Using sandpaper, you should completely remove any rough surface defects.
At the end of the finish coating is carried out under the walls of wallpaper (material price varies from 300 rubles. For three liters).It will remove even the smallest cracks and fissures.
