inkjet printer HP's very popular with users who print photos and color images.However, we all know that the majority of the company's devices manufactured in such a way that the plug CISS no way.That is why you can often find the question of how to refuel cartridge HP 122 or 121. This is due to the fact that in order to reduce costs users prefer to make your own dressing, instead of purchasing expensive consumables.
Device features
Unlike other companies that focus on the sale of the cartridges in the HP pay attention to the quality of the device.That is why all its products have a long service life.This property has the same cartridge HP.Therefore, after it run out of ink, it is possible to fill a fairly large amount of time, knowing that it will last ten times longer.
Features cartridge
Picking up the cartridge from the printer, an inexperienced user immediately face the problem of how to open it or fill it with ink.The fact that HP printers can be equipped with both refuel and nezapravlyaemymi devices for the storage and delivery of the dye.Check this only after the sticker comes off the top cover.It was under her and the hole should be located for refueling.If they were not there, it means that the product can not be reused, but try to make the filling is still necessary because of fundamental differences, it does not matter.
Toner Cartridge HP 122
First of all, remove the sticker from the lid.Under it should be five holes for ink markings or under them.It is therefore necessary to make their own, if it has not been made at the factory.It should be noted that the openings will serve to balance the pressure inside the container, and therefore, will help to improve the flow of ink.Refill cartridge HP 122 involves working with a single color dye, namely black.It is therefore sufficient to take the syringe dial it and pour ink into the holes.It should be borne in mind that consumption of black is more than any other, and the capacity of the cartridge in the model combines three sections.Therefore, it is possible to fill about 4 ml dye.After refilling the cartridge HP 122 is made, should be returned to the label in place.This is necessary in order to not fall into the dust.The air will flow into the cartridge at special grooves, which are present in the cap.
recommendations
refill cartridges should be immediately after it ran out of ink.Otherwise, it will dry up or clogged channels for printing.Work with the cartridge you need special gloves to protect your hands from paint.You should also buy a special liquid that is used to clean the head and helps to dilute the ink is too thick, which are in the capacity of a job for too long.It is possible to clean contaminated printhead.
