How to eternal fire with their own hands - a phased master class

How to make an eternal flame of paper with your hands on May 9?There are many craft ideas.Their main difference is only in how volumetric work is or is flat.If in the case of flat crafts more or less clear (you can make application), how to do layout of eternal fire with their own hands, that he was the volume?In fact, everything is simple.

How to make the layout of eternal fire with their own hands?

Layout eternal fire must consist of stars and flame.Large crafts also include a pedestal, which can be decorated with appropriate symbols (for example, the years of the Great Patriotic War and St. George's ribbon) and colors (for example, relevant on this occasion red carnations).

offer you a master class of how to make an eternal flame of paper with your hands.Gradually write out the instructions and post photos.

Tools and materials for the manufacture of

eternal fire of paper needed:

1. star pattern;
2. cardboard (large sheets);
3. red cloth or tissue paper;
4. scissors or a stationery knife;
5. red or bronze paint (better to take gouache);
6. brush;
7. glue;
8. line;
9. pencil;
10. Scotch;
11. wallpaper patterned marble.

When you stocked materials, you can begin to master the class how to make eternal fire with their own hands, gradually making every detail of crafts, and then combining all into one.

Step 1 - Layout stars

master class how to do layout of stars to the eternal fire with their own hands:

1. Take a large sheet of cardboard, scissors, glue or tape, pencil, ruler, paint and brush.
2. Place in the center of the cardboard point.
3. Spend dotted line through the point of two perpendicular lines.
4. Spend two dotted lines that form when crossing the letter "X".In length they must be less than half of the first two.
5. Connect the dotted lines all the vertices.You will get a star.
6. Put in front of each side of the center point of the star at a distance of a few centimeters.
7. Connect the solid line and the top of the set point.

As a result, you should get this figure as in the picture above.Cut it along the solid lines.

Step 2 - star

master class how to make a star for eternal fire with their own hands:

1. Take layout stars and cut it out.
2. Bend layout of the long axes of the star inside.
3. Spread layout.
4. Bend layout stars on the short axis outwards.
5. Spread layout.
6. Give the layout of the form to receive the bulk stars thanks fold lines.
7. Connect with each other protruding parts that should serve as a support for the star.This can be done either with adhesive when the protrusions are superposed on each other, or tape.
8. Turn the star and color it red or bronze color.

Step 3 - fire

instructions how to make an eternal flame of paper with his own hands for May 9:

1. Take three napkins or tissue paper.
2. Draw on one leaf mock fire.Its shape may be different, for example, as in the picture.
3. Fold the paper stack.
4. Cut along the contour of the layout of the fire.
5. Fold the layers together the resulting sheets.Each successive layer should be slightly lower than the previous one.
6. Cut the remains at the bottom.
7. Twist the bottom of the paper and secure with string or tape.

Flames ready for a star!

Step 4 - pedestal

Although already given instructions on how to eternal fire with their own hands, the master class will be incomplete without mention of how to make a pedestal.After all, he is also part of the layout.In our case, the pedestal consists of two parts: the first will be the other - to lie.Just at the last and place the star with flames.

instructions on how to eternal fire with his own hands - the first part of the pedestal:

1. Take a sheet of cardboard, a pencil, a ruler and scissors.
2. Put a sheet vertically in front of you.
3. Otchertite from the edge of the strip, the width of the small but long, the entire height of the sheet.You get the first strip.
4. Note from the line distance that will be equal to the width of the finished star (or a little more).
5. Otchertiv this width, you get the second strip.
6. Make another strip, which width is the same as the first.Will strip № 3.
7. Otchertite fourth strip, the width of which is equal to the second.
8. Make striped number 5 equal strips number 1 and 3.
9. Bend all 5 strips.
10. Bend make a box, only without the top and bottom.
11. Glue a strip between 1 and 5.
12. Make small cuts from one side to the folds of thin sides of the box.
13. Close the box.

The first part of the pedestal is ready.It can either be painted with paint or wallpaper paste over patterned marble.

second part of the pedestal is similar to the first, but there are a number of features:

• width of the second component must be equal to the width of the first.
• height should be slightly larger than the first.This is pretty simple: increase the size of the side walls.
• second box must be closed on both sides.

Once you collect the second part of the pedestal, zadekoriruyte it with paint or wallpaper.

Step 5 - picking up all the details

When all the components - the flames, star and two pedestal - is completely dry, you can start assembling them.

Operation:

1. Put the second part of the pedestal on a table or other surface.
2. Put the first part of the second, right up to the edge.Fix it possible by means of an adhesive tape.
3. Make a small hole in the center of the star.The most convenient way to do a thick needle or awl.
4. Insert the flame in the resulting hole.This should be done carefully so as not to tear parts.To do this, you can help yourself with a needle or toothpick.
5. In the center of the bottom of the pedestal, place the star of its pre-lubricated bearing adhesive.
6. Spread flame.

eternal flame is almost ready.

Completion crafts "Eternal Flame"

We have a master class, how to make an eternal flame of paper with their hands in stages, crafts and decoration means using colors and labels.

instructions how to make paper carnations:

1. Take the red corrugated or tissue paper of red and green, the wire.
2. Tightly wrap the wire green paper and attach it to the ends of the adhesive.Petiolus ready.
3. Fold a few sheets of red paper in the stack (three to five pieces).
4. Fold the paper accordion.
5. Wrap stalk middle accordion.
6. Trim the edges of the accordion, giving them an acute form.
7. Gently flatten each layer of an accordion.
8. Fan flower.

One clove ready.Make a few more of the above scheme.

Now you can decorate the pedestal the inscription.

Operation:

1. Take cardboard, ruler, pencil, scissors and red paint with a brush.
2. cardboard Draw two parallel lines, given that the distance between them is equal to the future value of letters and numbers.
3. Draw between getting lines of the following capital letters and numbers, which should be the same width: 1, 9, 4, 1, 1, 9, 4, 5, R, O, M, H, I, M, F, G, P, D, I, M, C, J.
4. Cut out all the numbers and letters.
5. details Color red.
6. Give details dry well.
7. print images with the Order of St. George ribbon or find a picture on the cards.
8. Cut image of the contour.
9. Stick the numbers and letters in the correct order on a pedestal (for example, as in the photo) and place the picture orders and St. George ribbon.

Put the cloves next to the star.Paper hack "Eternal Flame" is ready!To hack is not spoiled:

• Put it on a flat tablet.
• Dust crafts better not wipe with a cloth and a special brush.Then the parts are not damaged.
• Choose a location where there will be an eternal flame, without direct sunlight.Otherwise, the paper will burn out and lose brightness.

We hope that you understand them in a phased description of how to make the eternal fire with their hands.Master Class is over!

Add your own ideas in the production of handicrafts, for example, print pictures of soldiers, glue them on cardboard and cut out, leaving support.Put the figures obtained near the eternal flame.