It would seem that quite recently you drove a brand new car, which gave her a special joie de vivre shine dull garage.And now you notice small scratches and tarnished paint auto body.From its former luster was gone.Alas, the ability to completely outdated peculiar to all products and vehicles is not an exception.But there is a great way to give a second life to your faithful iron horse.It is called a miracle - polishing abrasive.
Types polishing
Care car body is made up of different operations.One of them is polished.It is of two kinds:
- protection;
- replacement.
Experts call another variety - complex, but it is, in fact, includes the 2 species.
Protective polish is applied for prophylactic purposes.It is used for the removal of water streaks left by the usual rain drops, oil stains, dirt and dust.To conduct such a procedure should be at least 2 times a year.
Polishing abrasive (aka replacement) - the process is more complicated.Its application is relevant in cases where on the body of the car is scratched, chipped and faded paint and lose presentable appearance.The essence of this procedure is to remove a thin layer of lacquer, which suffered most from scratches and cracks.Paint on cars is sufficiently thick, so allowed to polish the car several times.
Tools for abrasive polishing
to conduct recovery operations will be required:
- polisher.It is advisable to use a high speed, then the surface will not overheat.
- grinding wheels.They treat scratches.
- polishing wheel.There are different degrees of hardness.
- abrasive paste for polishing.
The latter means I want to say more.
All polishing paste, depending on the purpose for which they are used, are divided into 3 types:
- Krupnoabrazivnye funds.They are used to remove the streaks of enamel cracks and scratches.
- slightly tapered.Used to make auto body glitter.
- nonabrasive.Serve paintwork protection.
Polishing abrasive: especially the process
Before polishing the car is necessary to properly wash.After cleaning the surface is degreased.For this purpose, as special tools and conventional (diesel, white spirit).
abrasive polishing involves several stages:
- first body krupnoabrazivnoy processed pasta and hard polishing wheel.
- melkoobrazivnoe then applied using a soft circle.
- After that, the car wash is good.
- finishing touch - handling non-abrasive paste.
should be remembered that from the polishing, it is desirable to give a sunny or cold weather.It is best not to carry out the procedure in the open air and the garage.
beyond recognition can transform your machine abrasive polishing.Feedback from those who have experienced it, testify to its effectiveness.But many say the only negative - it takes too large a layer of varnish, so it must be done only when necessary.Especially dangerous is such a procedure for Japanese cars, because they have a very thin paint body.But when serious scratch, without the abrasion simply can not do.
