Many people during construction works only focus on the evenness of floors and walls, without thinking about how to properly align the ceiling.Sometimes it happens because of saving money, and sometimes - because ordinary laziness.But if you make major repairs in the apartment, pay attention to whether there is room at the top of any irregularities.In this article we will look at several options to effectively align the ceiling.
Alignment surface using putty
If you decide to paint the ceiling and still found minor irregularities and roughness on the surface, can resolve the issue ordinary putty.Investment ratio of the ways to restore the ceiling is quite low, so is available to absolutely everyone.Also find the putty at the nearest hardware store.
How to align the ceiling with his hands using plaster
following method can eliminate more serious problem than the roughness of the ceiling.Plaster is applied in cases where the upper part of the room is tilted at a certain angle, ie, it goes to one side.And if this trend is observed across the plane of the surface, out of the situation is only one - plaster.Here's how to line the ceiling in case of serious defects.In the process of repair must be carefully noted beacons all the irregularities, otherwise the work will be useless.
How to align the ceiling using drywall
If you do not want to waste my time on various measurements of surfaces and reusable applying a thick layer of plaster, as an alternative you can use a faster method of leveling the surface - construction of plasterboard ceiling.The advantage of this method lies in the fact that after the repair you will not have to "bother" the surface of the decoration, which significantly saves time and money.But it must be remembered that this design only masks the unevenness of the human eye, the very same ceiling are not aligned.
How to align the ceiling with the help of a stretch ceiling
This method of leveling the surface is the most popular among all of the above.Although to equalize it has nothing to do, but only hides defects ceiling.But it should be said that the film tension quite well matched to the interior of any room and still remarkably hides all the bumps.The main feature of this method is a significant time saving as aligned ceiling master in only 2 hours of time.Mounting tension ceiling consists of the following stages: the whole area of the ceiling placed straps, which will continue to set the film.Further by means of the heating element master pull it over the entire area and is fixed with special tools.The only disadvantage of this alignment is that the plant can produce only a professional master of using special tools.But despite this, after spending a few thousand installation, you get a beautiful ceiling that will delight you every day.
