How to glaze a balcony, and warm?This question is raised by many owners of apartments.The answer to this question depends on the result which would get the owner.After warming, as well as balcony glazing can be made by different techniques and using different materials.
on heat loss can be affected by many factors that should be taken into account:
- side of the world, which open onto balconies.
- material from which the walls of the house.
- intensity of heating in the house.
Before you begin finishing the balcony, you need quality glaze balcony, and only then proceed to the complex of works on warming.Currently, for glazing balconies widely used triple-pane windows with thickness from 3.2 cm. Before glaze balcony, you must also purchase dobornye profiles expansion type, which are mounted on the top and side portions.These profiles are further installed thermal insulation and outer finishing layer.
Although methods of glazing and insulation are different, all the preliminary work carried out in almost the same scheme.Before glaze and warm balcony parapet is generally carried out laying and erection of the wall of the side structures.Typically, for these purposes, or materials from concrete blocks keramokirpicha.
Many believe that only quality insulation enough to glaze the balcony, but it is not.Balcony or loggia, insulation does not occur properly, will not only cool in the summer.Glazed balcony can increase the temperature inside only a few degrees.So he became really warm, it is necessary to properly perform insulation.Technology warming balcony is impossible without the use of modern extruded and rolled insulators.These materials include izolon, penofol, penpoleks and some other heat insulators.Despite its small thickness, such materials perfectly protect the interior space from penetration of cold.
I must say, the various technologies insulation balconies are very similar to each other.Before work on the insulation, it is necessary to carefully check all the joints assembly and process them with a special foam.Another option involves caulking sealant facade.
How to glaze a balcony and warm, so it was really cozy and warm?Professional scheme involves the use of effective insulation in extruded Penoplex work.It penoplex is usually the first layer in the thermal insulation system.This material is mounted directly to the wall structure with special plastic fasteners.Next comes the processing mounting foam sections connections and joints.Over Penoplex stacked layer penofol.This material is necessary to lay foiled layer inside.Sheets should be laid penofol butt and joints to seal a special tape.The result is a high-quality insulation, minimizes heat loss.How to insulate a balcony glazing and other modern materials, can be found in the literature.
It is also qualitatively insulate the floor, or balcony, in spite of the thermal insulation of walls, will remain cold.Only after all the work on insulation and glazing will be completed, you are ready to finish the balcony clapboard or plastic panels.
