Despite the importance of BIOS, for the average user, this part of the computer, usually remains invisible.The default settings allow you to use the computer, never looking at them.Ignorance usually lasts until the first failure or until when the user wants to "accelerate" your hardware.This article will look at how to reset the BIOS settings and return to the standard, without resorting to service centers.
If the computer starts up, you can solve the problem without the need for disassembly of the system unit.During startup, the computer watch out for the bottom of the screen where the information should appear with the necessary commands and ways of their implementation (1-2 lines).In order to reset the BIOS, you first need to find the key to the panel, when clicked, will open the BIOS.Sometimes it's the key Del, but may be different, it all depends on the version.
Once you are logged into the control panel BIOS, try not to change anything in the settings, the more they will still be dumped.We are interested in the bottom line of information beyond the borders.It is painted in detail in the Management BIOS (use only the keyboard).Find a point there, explains how to reset the BIOS, and press the appropriate key.Confirm the command (in the window type «Y» and then press «Enter») and restart the computer.Everything - the problem is solved.
If you change the BIOS settings, the computer will not start at all, you'll have to reset manually.To begin to carefully remove the computer cover.Then find the documentation for the motherboard - without it would be difficult, especially if you have no experience in similar activities.Find the image of the board instructions and look at the location of these key elements.Your goal - the BIOS battery.Once find her in the picture, start searching on the board.Instructions on how to remove the battery, refer to the documentation.The battery must be removed by 20-30 seconds, then return to the place.
If after this procedure, there is a problem (reset time, some programs are constantly "forget" settings), it makes sense to replace the battery, t. To. It is likely, is exhausted (2-3 years).Replace the batteries, you save yourself from the questions about how to reset the bios t. To. It is automatically reset to its factory settings.For greater certainty wait for half a minute before inserting the new battery.
Remember that setting up the computer, using the BIOS, you ASSUME full responsibility.This method requires a certain knowledge, and change something only on the advice of friends should not be - could backfire.Sometimes after a failed experiment with "optimization" of the user is left no choice but to reset the BIOS.For example, a user may accidentally remove the thermal protection for the CPU and one at the first significant overheating of a burn - there is a resetting is necessary.In other words, be careful not to adjust what you do not have a clue.
