Despite the fact that cars with automatic transmission are gradually replacing the market "mechanics", still the majority of driving schools has a fleet of cars it with her.And even if you do not plan to ride a manual gearbox, this knowledge will not be superfluous.But for novice drivers who have decided to learn driving skills before applying to a driving school, knowledge about how to drive a car with manual gearbox, are the key to passing examinations before issuing rights.So today we will give you a detailed account of how to drive a car with a manual transmission.
switching circuit
First note the shift patterns.On most cars designated 5-speed.They are located so that they are very easy to remember.At first, just try to squeeze the clutch with the engine off and switch gear stick just looking at the road.So you can be sure that in the future at a speed of 60 kilometers per hour suddenly engage first gear.
Learning to drive a car in practice
If you make a motion on the "mechanics" for the first time, it is better to do it on the racetrack or in any part of the road where there are no pedestrians and other vehicles.Straight lengths of 50 meters you will be quite enough to master the master class "How to drive a car with a manual transmission."So, your car is on the racetrack.The first step is not to turn the ignition key, and check the position of the handle PPC.Usually, experienced drivers and put it in position "1" (instead of the hand brake), the machine is not rolled down the road.If the lever is in first gear, depress the clutch until it stops and move the handle to the neutral position (after this, it must safely move from side to side).Release the clutch and turn the ignition key.When the car start, the clutch pedal and then turn the handle PPC scheme to "1".Now add a little gas.Once the tachometer needle will rise to a value more than idle (on most cars it is in the green bar), gradually release the clutch.The gas is then not throw.When the car starts to get under way smoothly step on the accelerator until the engine speed is not reached values just above the green scale.
How to learn to drive a car ("mechanics" transmission) -
change gear to second gear usually necessary to switch to a speed of 15-20 kilometers per hour.But do not forget to follow tachometer readings.If his hand is out of range (for example, diesel trucks is a 1500-1600 rev / min), switch to "2".This is done very simply: the gas pedal is released, the clutch is squeezed, the handle is translated by the scheme to second gear, the clutch is released gradually, with the second leg slowly presses the gas pedal.Similarly proceed with the 3rd, 4th and 5th gears.
We have examined all the details of the question "how to drive a car with a manual transmission."
