Today's most popular fasteners are nails that are in great demand among the people.They are used in household situations, and in construction.In this regard, we can say that they are able to bring manufacturers a very good income.Production of nails can be both ambitious, and not quite so.It all depends on what the initial payment manufacturer intends to make to the project.The raw materials used for the production of conventional wires.The main aspect of the business to a good start is to have people who will deliver on this wire is not too big value.
To own production has been established great need to rent or buy premises and buy a machine for the production of nails.Vendors typically sell raw materials in the form of the bobbin, the weight of which amounts to about one ton.The raw materials mainly used a low carbon steel wire.If there is a machine, material and space, the production of nails does not require much physical effort.For production, you must have this wire and nail machine, which has the following characteristics:
1. The diameter of the rod reaches about six millimeters.
2. The length of the nail produced can range from twelve to 320 millimeters.
3. In one minute the machine can be made from one hundred to six hundred pieces.
4. The power of the machine is able to reach up to 20 kW.
5. Machine weight varies from one to two tons.
machine for the manufacture of nails is as follows: the input of the automatic feeding of the wire, and then is cut off at the right place at the right angle.On the cut line will subsequently be cutting edge.After exposure to the other end of the workpiece appears hat.Basically, the manufacturing process does not differ increased complexity.The cost of the machine starts from a hundred thousand.The room for the manufacture of nails can also be equipped with a special device for unwinding the wire from the spool.
In that case, if you plan to start production, does not differ too much in size, for the good functioning will not need to hire a large number of people, it will be enough only two employees.Moreover, additional education of workers is not required, as a machine for the production of nails acting in semi-automatic mode.
cost of production will be formed from the initial price of purchased raw materials.Typically, one roll of wire is estimated at an average of 23 thousand rubles.The wire diameter and the reel weight in this case is one millimeter and thus hundred kilograms.For electricity will need to pay about three thousand rubles a month.On the employees' salaries for a small production will take about twenty thousand.The rent per month will leave about nine thousand.If we take into account the factor that the cost of a single nail is about ten rubles, the monthly production of machine nails will produce about three and a half tons of material.In order for a business idea has paid off for at least one year is required to produce per month about four tons of products.
