a result of improper installation or due to subsidence of the house there is a question: how to adjust the windows, because in them there are various problems.Sometimes it is necessary to remove them to call a specialist from the service company.This implies and additional financial costs.To avoid them, it is useful to know how to cope with the problem.This article and tells.
fault window handle
most common fault - is its looseness, or, on the contrary, it is hard to turn.In the first case, will handle the installation of the castle.This method shows you how to adjust the windows, so that your child is not able to discover them yourself.To do this, a plate located at the bottom of this part and turn ninety degrees.In this position, the handle to the window fastening screws are visible.They need to unscrew to remove it, and attach a new one.Be sure to set the knob at the base of "comb" - so the regulator ventilation plate.Locks of plastic windows need to be adjusted periodically to avoid breakage.As care for them need to use a special lubricant.It can also handle all of the metal parts of the window.
second defect occurs when the handle is in the open window facing downwards and turns, why is not possible to close the window.This occurs because the rotary lock this part.Sometimes it works during a sharp turn handles in different positions.To resolve this problem, it is important to know how to handle plastic box fitted with different accessories.
So, the brand «AUBI» presupposes the existence of a thin plate of metal, which with a spring located in the handle.The plate should be pressed a finger against the seal and then turn the knob.Casement should be at that time in an upright position.If it is opened at an angle, the blocker will interfere with rotation of the handle.After aligning the position of the window and pressing the seal plate, you can turn the knob to the "open" position, and then close the window.In
Accessories «GU», «Roto» et al. Has a metal tab located below the handle.It is located at an angle to the frame.We need to put pressure on him so that he was parallel to the rubber seal.At the same time turn the handle gently, she took to the desired position.Modern fittings are available with rotation blockers, which work in the open position or in the position of the swing-out.This is to protect the window from inadvertent damage by the consumer.
Podduvanie due to seal
windows necessarily need to be adjusted.If this is not done in a timely manner, there is a deformation of the structure and windows broken seals fit from what out of them begins to blow.You can adjust the windows, that the defect is eliminated.To do this, follow the instructions and correct clamp window fittings.For example, fittings «Roto» required for troubleshooting, turn with an Allen key bolts floating body - eccentrics.In other fittings as the movable elements used rollers, on the edge of which is the point.It should be turned towards the seals.It depends on the density of the adjoining wing.
sagging sash windows
Consider another common variant breakages of plastic windows.Namely, how to adjust the windows, if sagging sash during opening-closing touches accessories and other items.To lift the sagging fold into the hole located in the end of it, you have to insert the hexagon and turn it clockwise.In this loop to pull the flap, whereby the lower part is lifted.
With a flat plastic box, which is a qualitative adjustment, you will provide your home with warmth and comfort.
