of PVC window systems are known for high energy efficiency and reliability mechanisms.Function of warming is often the key in the selection of designs.Correctly chosen for a particular set of openings in combination with a set of high-tech accessories will ensure thermal comfort in winter and summer.But for this it is necessary to competently approach the profile settings.Each season to contact the master is very wasteful, so the question arises, how to adjust the plastic window so as not to muzzle, while maintaining the full functionality of the design.
How to choose the right system?
Exclude lot of problems with subsequent maintenance windows will initially correct choice of design PVC.To do this, the following points should be considered:
- design parameters (model profile, number and size of cells);
- characteristics of glass;
- number of leaflets;
- structure accessories;
- additional components (grid, window sills, corners, sills).
Each of the items of choice, one way or another, affect the ways of adjusting the windows.Moreover, even without setting the system assumes a certain level of heat saving.It is logical that the cost of plastic windows in the expanded configuration increases - depending on the brand and the glass area, it can be 15 to 30 thousand. Rub.Of course, there are also the construction of 40 thousand., But this is a premium model for exclusive design.One way or another, "complete stuffing" is not always reflected in the function of warming, so the main means of achieving optimum climate still remains adjustment.
When there is a need to adjust?
There are several factors that entail the need to set up windows.It may be natural and justifiable technical reasons, as well as the occurrence of failure, which affects the leak.
to common problems of the second kind is a violation of the leaflets, which converge to the frame properly.This results in a gap through which the cold air penetrates.Many such cases are beginning to look for ways of how to adjust the plastic window so as not to muzzle, but normal position adjustment eccentrics in such situations is not sufficient.
not less common and erasing seals.Especially those which are made from low-quality material or have not been properly integrated into the system.Worn seals leads to drafts, which leads to the need to replace them.
There are also more serious problems.For example, the precipitate of the building leads to imbalance of the whole structure.Troubleshoot this kind is impossible without the help of professionals.The remaining problems are solved self-adjustment plastic window subject to the provisions of the manufacturer.
System Setup eccentrics
Most of the problems with the lack of integrity of plastic windows is solved by means of said eccentrics.These elements are in the end flap, which also is the handle.As a rule, self-adjustment plastic window by eccentrics requires the following actions:
- pull them over;
- perform sufficient cranking;
- release element to it naturally into place by a spring mechanism.
This procedure must be performed in the off-season.For example, plastic windows in the winter requires a higher level of pressing and summer, respectively, the desired ventilation.
Such a method allows you to configure the degree of pressing in the part where the handle.If the pressing need to strengthen the valves where shelters are located, you should use another method.
To perform this operation required Allen key.The meaning of the procedure is to remove small imperfections windows that provoke drafts.
Horizontal adjustment is carried out by simple manipulation of the key special adjustment holes, which are located in the hinges at the top and bottom of the design.Turn the key, you can increase or decrease the space between the loop and fold.The procedure must be done delicately, because the mechanisms of the system are very sensitive to physical shock.Testing the progress of the key, you can figure out how to adjust the plastic window so as not to muzzle, in the particular case.It remains to bring the angle to the optimal position.
need for vertical adjustment arises sagging shutters, which also affects the tightness of the window.Venue operations - the same adjustment hole, which can be found under a special cap.The meaning of this configuration is similar to, and aims to minimize or increase the gap between the hinge and fold - the angle of driving, you can get the most comfortable climate.
is noteworthy that the cost of plastic windows at the level of the budget segment (within 5-12 thous.) Does not mean that the system will play in the ability to adjust.Regardless of the price, modern design of polyvinyl chloride could be called unified by the basic principles of the technical device.
How to replace the gasket?
If adjustment methods described are not intended to fix defects in plastic structures and mechanisms, the replacement of the seal is made in view of their poor performance in ensuring tightness.Draught due to outdated cord is especially felt if used winter windows, specially designed to improve the thermal insulation function.
new seal must be suitable for a particular model of windows, or may form even greater backlash.The work will require a high quality glue that can secure the rubber, and scissors.You should also decide in advance how to adjust the plastic window so as not to muzzle, and then proceed with the renewal of the insulation element.
Withdrawal seal will not cause problems.The main thing - to find the slots and gently remove the power cord without damaging the plastic.Then formed a niche cleared of mud and dried, after which the adhesive is applied to the surface.Laying is performed whole segment, the edge of which is also fixed with glue.This replacement procedure is completed.