Every user knows about the blue screen of death, or BSoD (blue screen of death).Many people think that this is one mistake means the termination of the operating system, which is treated only by reinstalling.However, few people know that such errors are marked in different ways according to the system failure.A striking example of this is the Windows 7 when 0x0000007b boot.
Meet closer
see the number of errors can be at the end of the text on a blue screen.Will he look like: stop 0x0000007b.This code tells the computer what exactly is the cause of the BSoD.This code indicates that Windows 7 was not able to gain access to the system partition during boot.This means that the problem may be the following:
- driver is responsible for the initial loading of the operating system from a hard disk is missing or damaged;
- incompatibility or problems in hardware;
- data in the Windows registry, drivers are responsible for loading the system is damaged;
- the boot sector of the driver responsible for the loading of the system is infected or Remove Antivirus.
As can be seen, BSoD 0x0000007b in Windows7 and XP can occur for various reasons, and all of them are located in different areas of a computer system.Therefore, to more accurately identify the cause of the fault and make the subsequent "treatment", it is necessary to consider each issue separately.
Stop 0x0000007b due to incompatibility of hardware
Now a lot of computers and laptops equipped with expandable different hardware (RAM, graphics cards, hard disk).In order to further detail sat like a glove and not to create problems, you need to check its compatibility with the motherboard.Some do not, then the new item allows the computer to run, and there is a stop 0x0000007b error BSoD in Windows.
solved this problem as follows.The first screen of death should appear after connecting a new hardware component.To check the compatibility you need to get this item, and then restart the computer.If all goes well, the problem in it.If several parts are connected (for example, the computer was going to in part), then you need to remove every turn (unless, of course, there is a pair), while the computer starts.
If all else fails, it is not necessary to disassemble everything and throw in the trash, because the problem 0x0000007b Windows 7 boot may be lurking in the system.
fault driver
problem may lie in the device drivers that are responsible for booting the operating system.For example, the old hard drive has been replaced by just bought, and then there was an error 0x0000007b Windows 7 boot.Or was rearranged inactive screw from the old computer.This system is for some reason not to switch or the driver is installed on the new device.
solves this problem since.Return the old hard drive in place, then the hard drive of the brand, we want to set, download the driver package.Next, set the boot disk or a USB flash drive with these drivers using any of the program (Alcohol 120, UltraISO, Nlite etc.).Put an unidentified hard drive on its future location.Running the computer, go into the BIOS and set the floppy drive or USB flash drive in the first place in the priority of bootable devices (should be on the menu BOOT).Then run the installation of the driver from the disk.After the driver installation, restart your computer and work.Now error loading Windows XP 0x0000007b and download Windows 7 should disappear.
problem with Antivirus
Sometimes it happens that your antivirus program takes an important operating system file for a virus or spyware.She then it blocks or deletes an infected object.As a result surprised PC user asks: "Error 0x0000007b, I can not load Windows - how to be?" In this case, too, can help to reinstall the driver, but where is the guarantee that the antivirus again, delete it?
best to proceed as follows.Turn on the computer and to boot, press F8.In the list that appears, select the "Last Known Good Configuration."After the operating system has booted, you need to disable antivirus and roll back the system until delete an important file.This is done as follows: "Start - All Programs - Accessories - System Tools - System Restore."Then select the stored configuration date and makes recovery.When everything returns to normal, it is necessary to replace the anti-virus program, or at least make an exception in the Windows folder.
trouble registry
Error 0x0000007b Windows 7 boot may occur when replacing the old motherboard to the new one.The problem is that Windows, which is located on the hard drive can not load the correct drivers for the new motherboard.This problem is solved through the registry, and it is better to think in advance, as no motherboard certainly not be able to start your computer.
Go to the Start menu and in the search prescribes the service name "Run" or press Win + R.In line dialog box, enter the command regedit, and then get to the Registry Editor.Here we go through the following: HKEY_LOCAL_MACHINE - SYSTEM and delete (or better simply rename) folder MountedDevices.In the same go to the System folder CurrentControlSet - services, where we find the following sections: Amdsata, Amdide, Ayapi, Amdxata, Intelide, Pciide, Msahci.
Each section of this document are looking for Start and change the value to 0. After that, you can safely change the motherboard, which should be no problem to make.
Diagnostics error
often happens that the first is loaded, an error 0x0000007b when loading Windows, and fractions of a second after that - a system reboot.Nothing good is not the bears, because without the blue screen is impossible to diagnose the cause of a malfunction.But this feature is easily disabled.
Click on "My Computer" right mouse button and go to "Properties".Next, select "Advanced system settings."In the "Startup and Recovery" click "Settings."This opens a new window, where in the "System Failure" to the column "Automatically restart" remove the check mark.Now, while failure will restart instead of an error.
error can identify the following information:
- INACCESSIBLE_BOOT_DEVICE - error type.It is always written at the top in big letters across the underscore.
- STOP: 0x0000007b (...) - the hexadecimal error code is always at the bottom of the screen.
These two signs are sufficient to determine what went wrong and how it can be solved.
View events
understand why not boot of Windows 7, BSoD 0x0000007b appeared and what to do with it, not only for the above information.Identify causes normal operation of the system by using the event viewer.Find them simply: "Control Panel \ Administrative Tools \ View event logs."Most likely, the event type is "critical", where you can see the number of failures for different time periods: last hour, day, week.Clicking on the plus sign, you can expand the list, which will include general information about the error.Clicking twice on the event, you will discover a window with a detailed description of the problem on which we can draw some conclusions.
if the event recording function is disabled, it should include.Go to the familiar properties of the computer in the Advanced System Settings.Window and share the same "Startup and Recovery" and "System Failure".Put a check mark next to "Write an event to the system log" and write debug information exhibit "Kernel memory dump."You can also specify the file to which events will be recorded.
In conclusion
is worth remembering that the computer gives an error for a reason, they need to read, because to correct, without knowing what is meaningless and useless.And this case is no exception.BSoD any errors can be identified and eliminated in different ways, not only resetting Windows.
