curved walls with waves jarred by the time the material can only inspire the seasoned sailors and lovers of old, but the modern premises, they really do not fit.If you decide once and for all put an end to all this mess, then you should check out our article!Since leveling plasterboard wall?First you need to know that in this case, use two standard methods: with or without a frame.
It is not hard to guess, in the first case sheets of material mounted on a specially created for the occasion basis.It is easier and faster to glue them directly to the wall (frameless method), but in this case it should be at least slightly different from the surface of the old tank ranges.So often prefer to align the wall plasterboard with their hands, erecting the frame.As a rule, they make it out of wood, but this material has a number of annoying technical flaws:
- Strange as it may seem, but this design is much more difficult to install.
- Unfortunately, they often forget a thorough drying of the material, resulting in a wall can go exactly the same waves that were on it before the repair.A crumbled pieces of plaster made the question of how to align the walls of plasterboard, simply irrelevant.
Thus, the repair is not really advise you to save on consumables suppliers.Where more reliable and easier to assemble the metal profile, which also has better reliability and durability.
In addition, with the help of metal repairs can be carried out in the premises of any purpose and operating conditions.Moisture this material is not afraid, so that even when the temperature drops daily in the room, and the formation of condensation, you can not worry about the state of their walls.Are you still wondering how to align the walls of plasterboard?First of all, you need to buy the guide and rack elements.Do not forget about the construction quality level, square, roulette and screws.
first to the floor and the ceiling is necessary to fasten the guide profiles as they should be leveled and secure, then you can begin to rack fasteners.Be sure to remember that they need to make a step equal to the width of the sheet material.So how to properly align the wall of plasterboard is possible only with careful adherence to the technology, forget about haste.The saying about the seven dimensions in this case, it becomes extremely important.
After assembly of the frame is necessary to begin securing sheets of drywall.It is best to use for this the standard black screws, which are made of oxidized metal.As a rule, enough length of 25-32 mm.For every 30-40 cm of space taken by one screw.
to the joints between the sheets did not look like impact craters, they need to putty.The first thing to handle those places where you screw screws.Re-perform the procedure using a special mesh that will prevent drop-fillings.Your wall is ready!So you learned how to align the plasterboard wall!Nothing complicated about it, but because it is easy to cope with even a novice.
