problem of recycling used tires concerned ecologists from the end of the 70s of the last century.This is especially true in our country, where there is no sufficient number of companies able to use them as secondary raw materials.As they say in such a situation, how can one be saved, so we can only welcome the craftsmen who are trying to free the landfill from these non-degradable waste and, for example, to make beds of the tires by hand.They can be very different from simply dug into the ground of waste tires, which is planted with flowers, to the complex of vases in the form of a swan with bright pattern.If you are interested in this idea and want to land in front of your house decorated beautiful flower bed of tires, how to make their own hands this can be read below.
What use
If you have a choice, it is a complex bed of tires, with his own hands made, the production of which involves cutting out figures will look better if you use products of foreign manufacture, as they have more subtle and supple tires.Furthermore, it makes sense to give preference to winter tires, as they are more textured and used tires.The fact that the worn proctor softer, so the eversion process is easier and does not require the application of special effort.
"Flower"
to make do original beds of the tires with his hands in the form of daisies, just take any bus 4, preferably of the same size.You need to remove the rubber from the metal rim and cut so as to obtain two identical halves.So you need to act with three tires and have a rubber shell keep intact, as it will be used as serdtsevinki flower.Then, half and whole tire must be painted in different colors and to dig 5-6 cm into the ground, laying out one flower has 6 petals with round midway.The composition will look more interesting if serdtsevinku plant flowers of one species, and the petals - the other.
flowerbed pyramid
This is a very simple and beautiful version of the beds of the tires with his own hands made, suitable for areas or courtyards with a small area.To implement it will need a 6 tires that need to be painted in bright colors and put in a 3-series, which is 3, 2 and 1 bus.If a suburban area is quite spacious, it is possible to make the design more difficult, laid out in the bottom row of the flower 5-6 tires on the second - from 3 and topped it with one.This pyramid will look particularly impressive, if you choose for the top "flowerpot" plant with large leaves.
flower bed of tires with their hands in the form of a vase
There is a more sophisticated version, the implementation of which will require a lot of patience.However, the result is generally obtained simply superb.
So, to create original beds of tires for its hands in the form of large vases, resembling the opened flowers, you must:
- Put the tire on a flat surface and chalk to draw the desired shape of the petals around the entire circumference.The size of each petal should not exceed 12 cm.
- Cut with a sharp knife or workpiece Fretting Application circuit.To facilitate this task can sometimes be applied to the knife a little liquid soap.
- Run longitudinal slot along the grooves of the tread at a distance of about 10 cm.
- Using a grinder, make a few incisions on the outside and smooth cut rubber indented 15 cm. If everything is done correctly and it hurts Bulgarian steel cord should be allocated white smoke.
- Remove the tire inside out so as to obtain a kind of flower on a stalk.
- decorate using enamel, oil, or nitro.
to bed with tires made with his own hands, has become even more beautiful, on top of the base layer of paint can be applied using a stencil pattern or stick a variety of decorative elements.
Pyramid Hill
If you have 3 different sizes of tires or at least two and one plastic bucket capacity of 0.5 liters, it can be done on the principle of pyramid known children's toys.For its creation, the tire should be stacked in order of decreasing diameter, filling every land.You need to set the bucket on top and planted it in the tire from the lower layers of vines, so that they grow hanging down from the hill, covering it all.
Klumba- "cup"
Originally will look and the bed of the tire with your hands made in the form of a cup.And if space allows, it is on the site can be set even a tea set.
For such artifacts must first make the bottom part, which will depict the saucer.Take the bus from the truck, which should be cut jigsaw sidewall (so that the work was easier, it is recommended from time to time to cool canvas jigsaw in a soap solution).Having dealt with this work, take the bus R13 and well-sharpened, and even better sidewall cut cobbler's knife, blade lubricating liquid soap.After this bus turn inside out so that the protector was inside, and get the bowl without a bottom.The next step - making the top of the mug, which will need a little larger diameter tire, for example, the UAZ.From it cut both sidewalls.Thus on the one hand should make it such that the resulting hole size was not larger than the "cups".In addition, the largest tire scraps cut strips for handles.
When all the parts are ready, should begin to paint and assemble beds.For this "dish" and pen color in one color and another part of the circles.Next, in a place where going to install a bed, steles piece of cellophane and put on top "saucer", and in the opening set of his first "bowl", and then the top of the circles.Next, using screws fixed handle and a stencil applied on a mug cup color "saucers."All!Now that you know how to make a bed of tires with their hands as a cup.It is necessary to fill the earth and planted flowers.
"Pig" and "Ladybird"
If you take the question of how to make a bed out of the tire with your hands easier, but to make it look original, you can resort to your imagination.To do this simply can be removed "gum" with the rim, turn it inside out and paint accordingly.For example, if you want to see on the site there was a ladybug, can be painted in red hubcap, applied using a stencil and black dots represent its face with eyes.And, you can make a funny pig, having painted the inverted bus in bright pink and has fitted the spiral tail, cut from a plastic bottle.Once in a flower bed will be covered with earth and planted plants should be of a piece of rubber from other tires to cut the head with ears and snout, and insert it into the bus circle between colors.
Klumba- "frog"
flower bed of tires made with his own hands, may be very different forms, for example, like a frog.For such crafts will need:
- three used tires;
- two covers from kilogram buckets of ice-cream or melted butter;
- enamel PF green, yellow or red;
- self-adhesive color paper;
- hose;
- awl;
- sponge;
- wire.
klumbu- How to make a "frog"
The manufacturing process is very simple: the tires need to paint in green and, if you wish, apply a top-yellow rims.Then place the selected set on the two buses, and from above, between, third.From hose, also painted green paint, you need to cut two lengths of about 1 m, and from another tire - 4 feet and put the two lower front tires, and two between the pre-attaching them to the "hoses".When the body of the frog is ready, you need to go to the design of her head.To do this, on the covers of buckets of ice-cream is necessary to draw the eye, and on top of the bus - red paint mouth.After this is simply covered with earth and planted flowers.If you wish, you can turn a frog into a bewitched princess, make her a crown of plastic bottles, painted with yellow paint.
"sun"
Many gardeners are interested in how to make a bed of tires with their hands in the form of the sun.For such crafts will need one bus, bright yellow paint and a few plastic bottles.The tire should be removed from the metal wheel and buried in the ground so that on the surface there was only a semi-circle.
Then the tire is necessary to make holes with a diameter equal to the size of the neck of plastic bottles, and brushing them with glue, screw in the tire.After that you need to paint the entire structure in yellow and plant flowers.
flowerbed pool for aquatic plants
lilies and water lilies can be an excellent decoration of suburban area.But what to do if you can not equip even a small pond or pool?In such cases it is sufficient to make "water" a bed of tires.To do this, the tire must be cut off the top and to dig into the ground to half.Then you need to put on top of a round piece of a special waterproofing film, which is intended for arranging of swimming pools, 1 m in diameter larger than the diameter of the tire.Speakers over the rim of the tire edges of the film should be wrapped outside, to consolidate and impose small round stones or broken bricks.It is necessary to put on the bottom of the pond a small mesh basket with the ground, which are planted the roots of water lilies.
