How to make a wooden floor in a wooden house cleaner: practical advice

Over time, the surface of the wooden floor worn and requires restoration.Properly carried out the old planing surface will significantly improve the appearance of wear.The process of sanding is to remove the old surface with worn layers of varnish or mastic as well as misaligned and burrs.So how to make a wooden floor in the wooden house more even quite difficult, it is necessary to resort to using a tool such as a machine for sanding.

First you need to get acquainted with some features of this work.It is necessary to find out whether this method is suitable for your suffering gender.Carefully inspect it and appreciate the strength of fixing the old boards.If they hang out, and between them there is a wide gap, then spend scraping machine will be useless.In this case, the old floor would have to be removed and re-plank to the joists.If you are thinking about how to make a wooden floor in a wooden house a little smoother, you should keep in mind the fact that the boards in any case should not be the nails, which are able to bring your instrument failure.

If the floor is tight and do not play, then you can safely use the machine for sanding.They come in various designs - surface, drum and belt - depending on what and operation of each of them will be different.Besides cars required supplies and repair materials - sandpaper, varnish and putty paste.If their costs seem too high to you, think about what the new floor in a wooden house to make a quick certainly will not work, and the cost is much more expensive.

Preparing for sanding

If skirting nailed thorough, they can be left in place.But we recommend not to spare time and to dismantle them completely: so how to make a wooden floor in a wooden house, we plan to more evenly with the help of power tools, do not take risks and leave extra room for its damage.It is necessary to check the surface of the floor, not only for the presence of nails and screws, and skived speakers sound knots and fossilized layers of paint.When operating the machine, they can damage the belt sander.

Stages sanding

  • With coarse grinding remove the old paint from the parquet.In this case it is better to use a special tool Surface.
  • second grinding disc Surface held tool.Him remove traces of rough handling.
  • third stage - bringing the surface - made corner sander.She "work out" hard to reach places.

remaining after the grinding work slots and other defects should be zashpatlevat.Since the floor in a wooden house (with their hands to polish it, by the way, is quite simple) would be even more beautiful.

Putty

sealing cracks produced putty paste, which can be mixed with clean dust remaining from sanding.Thoroughly kneaded paste is applied with a spatula, evenly distributing it on all sites that have defects.After the final drying of the repaired areas they need more time to polish for perfectly flat and smooth surface.Then you need to thoroughly clean the floor of debris and dust.After finishing cleaning proceed to the application of a special paint or varnish, then dry the coating is not less than two days.

We hope that the material of the article was useful to you, and you've learned how to make a wooden floor in a wooden house not only smoother, but also much more attractive!