Building your own home - employment difficult and very responsible.And the question of how Croutes metal tile roof, there is many.After all, people often prefer to do without the help of professionals, in-house.But the advice of experts is still worth considering.
few facts about metal tile
This roofing material is recognized as the most popular.This contributes to its strength, smartness, reliability.In addition, it is lightweight and easy to assemble.If there is a need to reconstruct the old roof, it is the most suitable material.Lifetime it is long enough - up to thirty years.But if it is to take care of him properly.Everything is so good and wonderful that it is worth recalling the shortcomings.Among them you can isolate noise generated during rain or hail.And if you do not keep stacking technology, you'll even hear the birds, who go on the roof.
How Croutes roof metal: technology features
In order to properly calculate the amount of material you need to familiarize yourself with the following data.
- Useful part of the normal sheet has a width of 1100 millimeters.
- roof pitch is less than 140 ° is not satisfied, then the overlapping sheets to be on the same wavelength in width.
- If the previous figure is less than 140 °, the width should be in two waves.
- from the lower edge of the roof sheet release in an ideal - not less than 40 millimeters.And on the end - about 30-40.
- distance between the rafters of the roof is less than one meter.
- If two rows of stacked sheets, the overlap in length need to perform at least 150 millimeters.
So when you do the full measure of the roof to the width and length of the sloping side, check it on the diagonal, using the data above, we can safely count the number of sheets of material.
Waterproofing and Flooring sheets
If you do not know how Croutes metal tile roof, note that carry hydraulic and vapor barrier should be mandatory.This will ensure a long service life of the roof.Its internal surface should be covered with waterproof tape and then stick to it thermal insulation and vapor barrier film from the top post.
So brim metal tile roof.The process begins with the fact that you hook Cornice strip on the bottom board batten.You can now attach sheets.So, if the roof of the tent type, the installation starts from the top, and should go down.If a gable roof, the sheets are installed from the end to the bottom thereof.
Metal attached to the sheathing on the cavity through one wave with screws.For cutting the sheets, you will need to use electric shears, circular saw or a hacksaw.If the front door of your home is with a sloping side of the roof, you need to fix it over the snow barrier.
If you are wondering how Croutes metal tile roof, then you will definitely be interested in how much it costs.The final amount will include the cost of sheets, ridge, eaves, other related parts, seals, fasteners, assembly work.
So now you know how to cover the roof of metal.
