In view of ever-increasing demands of the modern software the user after a while may reconsider the question of self-sufficiency of the configuration of your computer.As a rule, the owner of the computer technology produces primary upgrade by increasing the RAM on your PC.However, in addition to hardware upgrade (extra strips of memory), the user can use a number of software tools that allow you to optimize the operation of said system component.What, ultimately, the same positive impact on solving the problem: "How to add memory to your computer?".If you want to achieve the best result in the process of increasing the speed and performance of your operating system, but do not quite understand how to do it and how much it can cost you - spend a few minutes of your time reading this article.You will receive the invaluable benefit from free trial to the supplied material.
So, top-making "How to add memory to the computer?»
covers the methods (software and hardware upgrade RAM) can be used independent of each other, or properly interacting solutions.It should be noted that an integrated approach is preferable to a simple action - add a free slot one or more memory modules.A little later you'll find out why.
method №1: Bought put, launched
for the sustainability of Windows 7 must be 1.5 GB of RAM.As a rule, acquired office PC configuration has two gigabytes of RAM.For intensive programs (video editors or computer games), this volume is not always enough.Consequently, there is a need to expand the user memory capabilities.However, before we implement this scenario a hardware upgrade, you must ask the question: "Can I add memory?".Since in the case when using a 32-bit version of Windows, written by two or more gigabytes for the current amount of RAM can simply not be involved in the system since some of the limitations that initiates BIOS- firmware.Another unpleasant aspect for the user can be a mismatch purchased the typical memory module socket motherboard.In other words, before going to the store you need to know exactly what type of memory supported by your PC or laptop, as well as the technical characteristics of the installed memory.
Forced valuable retreat
Most interesting newbie question: how much memory needs to be some specificity.Because modern computer technology there are several types of RAM: DDR, DDR2, DDR3, which, in turn, have a number of significant differences.Depending on the manufacturer and the technical characteristics of the memory ranges and product cost.However, the example of the brand Kingston can cause some price comparison of different species produced by RAM.
- DDR2 1GB - about 1400 rubles., And 2 GB will cost 2300 rubles;
- DDR3 2GB - will cost 1900 rubles., 4 GB - 3100 rubles., But the memory of 8 GB of this type - 6400 rubles;
- SODIMM DDR2 2 GB - 1800 rubles;
- SODIMM DDR3 4GB - 3200 rubles. And 8GB price will be around 6200 rubles.
In addition to information about how much memory you will also be useful for other: each type of "RAM" in the segment is subdivided according to the specifications: the nominal volume, bus bandwidth and data rate (frequency), which are indicators of the performance and efficiency of a particular modification.The laptops use a similar memory, but slightly modified, and having the designation SODIMM, that, in fact, is a type of RAM.By the way, the cost of "minimized" memory does not differ from the fixed version.However, some modifications laptop-memory still bypass the "desktop counterparts" in the price.
Installing additional memory strip
to equip desktop computer has one memory module, follow the following recommendations.The result is a practical answer to the question: "How to add memory to a computer."
1).Turn off the system unit from the electrical power source.
2).As a rule, access to the internal components of a PC is accomplished by loosening the band fixing screws that hold the protective cover.Important: in the case of personally opening the "system unit" more expect to guarantee you do not have.Since opening the lid you will inevitably damage the seals service.
3).Install the new memory module into the appropriate slot.If present few note the marked connectors.Normally, the correct sequence is indicated as a digital value.In some cases, there is a special procedure established by the bars of memory.Interactive terminals (for example, 2 modules of one manufacturer and another 2) painted in two different colors.
Take the first congratulations!Now that you know how to add memory.
portable solution
Although the design features of a laptop, the installation of RAM, in general, fairly simple action ... if you have a thin Phillips screwdriver.
1).Turn off the computer and unplug the portable him.
2).Remove the battery from the device.
3).Look carefully at the back of the notebook - knurled or engraved designation as «DIMM» or «MEMORY» - a place where memory is located.
4).Remove the cover retaining screws and gently pry the edge of the guard.
5).Install additional memory, and close the cover.
method №2: USB flash drive as an additional RAM
For example, Windows 7 operating system and its augmentation Ready Boost is considered a hybrid version of expandable memory resources.
Insert the flash drive into the USB-connector PC or laptop.Format the partition removable media.Place your marker on the label stick and, while holding the right mouse button, open the context menu from which you select "Properties".In the window that opens, click the Ready Boost.Activate the check-box "Use this device" and then click "Apply" and "OK."
As you can see, the question is: "How to add memory to your computer?" Can be resolved, and this method.
method №3: Optimize RAM
install on your PC a utility Memory Booster, you streamline your OS.Despite its small size and compact interface, the program can easily cope with the optimization of RAM, freeing up the various software redundant memory PC.This considerably improves system performance.The utility is always running in the background.So control of the most "voracious" program will be organized very vigilant.
Method №4: Virtual Memory OS
This method is purely a software tool capacity RAM.Standard Windows-based tool provides expansion of operational resources by allocating a specific space to the needs of temporary files.Do not confuse the clipboard and a special section of the virtual OS, it is fundamentally different services.The paging file is generated OS, it has a value equal to the amount of RAM installed.When the physical memory is not enough, the system uses virtual volumes of RAM.The paging file size, you can either decrease or increase.It all depends on the user's needs.
practical solution
1).Open the "Start" menu.
2).Hold the handle on the "Computer" and right-click to open the context list from which go to "Properties".
3).Being in the service of the "System", activate the link to the left "Advanced Settings".
4).In the block "Performance" click on the button.
5).Go to the "Settings", click on the "Advanced" tab.
If you activate the "Change" button, you will be given the opportunity to make changes to the settings specified by default.
In conclusion
«So as you can add more RAM?" - You ask.Meaning strictly predetermined.It all depends on the capabilities of your motherboard.BIOS version also has a great influence on the "hardware perception" PC.Finally, a 64-bit operating system removes virtually all limits on the amount of RAM.But, as you know, in this situation, the operating system - the secondary instance.Therefore, only the BIOS determines whether or not a board to "accept" the desired amount of RAM.So before you upgrade your PC, please read the technical data sheet of the computer.
