problem with battery discharge familiar to every car owner.And often it happens in the day without a car simply can not do.In this case, the question arises of how to start the car with the pusher.Today we look at how to do it correctly.
Terms
To begin, we note that just because the machine will not start with the pusher.This can be done only if your brake system will be in absolutely perfect condition.Also, you will need to find another machine that will serve as a tug.If such a number is not present, it will fit and physical strength.Ask friends or neighbors to push your car.It is sufficient to 2-3 people.Prior to this, be sure to stipulate conditional stop signals that can be fed from the window or horn.
If you have a car carburetor, it is also necessary before starting to pump fuel using the accelerator pedal.It's enough to make 2-3 pressing into the floor.If you have injection vehicles, such manipulation should not be done.
condition tailpipe
Before you start the car with a pusher, pay attention to other aspects.If you encounter this problem in the winter, be sure to check the condition of the exhaust pipe.It should not be packed with ice or snow.Ice - a sign of frozen condensation.In this case, start the engine you will not succeed.Although you can try - it will not lead to failure of the belt, and other important elements of the car.What you need to do?To do this, remove the battery and take it to a warm place.It is better to put it on the battery.But do not forget that the battery should not be much hotter.Therefore, we set it at a small distance from the battery, and not on its surface.On warming will take about 2-3 hours.Then put the battery back in the car and make the launch.
If a pipe was formed in the snow, clean it and look forward to a successful launch of the internal combustion engine.Nothing warm then not necessary.
As with the pusher to start the car in the "mechanics"?
If all of the above rules are met, you are ready to start.So, how to start the car with the pusher (injector)?First, insert the key into the ignition and turn it.Further includes "neytralku" conditional command and serve the people, so that they began to push you, or the driver of the second car, started to pull.
When your car has started to move a little bit, it is necessary to squeeze the clutch and turn on the second drive.After this should happen push, and the engine in such a case starts.
again squeeze the clutch and brakes as necessary.At the same time the gear lever in neutral position.To avoid trouble should be done all of the above manipulation as clearly as possible and quickly.
all, our engine is started.Now you can apply the appropriate signal in towing or pushing back the people.But in order for the engine to warm up properly and stalled repeatedly, giving it run for about 15 minutes time.
What if the vehicle starts up with the pusher bad?As practice shows, sometimes motorists can not be the first attempt to start the car.In this case it is necessary to repeat all of the above steps again.This is done as long as the car will not start.After running do not forget to recharge the battery, so you do not have to push the car again.
How to start the car with a pusher on the "machine"?
Almost all motorists say that this method of automatic transmission the engine is started, you should not apply.And there are objective reasons.The fact that the automatic transmission has a slightly different principle.
essence launch cars with pusher is the ability to transmit torque from the wheels through the transmission to the engine.For machines with the "automatic" when the motor is switched off PPC does not work either, because the oil is applied to pump liquid only when the internal combustion engine.In other words, the vehicle is shut no communication between the wheels and engine through the box.Accordingly, when the towing vehicle forces the torque will not be transmitted to the motor and piston group remains stationary.However, some craftsmen launch a car, even with the transmission.
How to start the car with a pusher with automatic gearbox?To start the engine, proceed as follows:
- towed vehicle speed to 50 kilometers per hour.Understandably, a neighbor's physical strength is not limited - will have to find another car.
- trains at a speed of a few minutes, we translate the lever gearbox from the neutral position into the "drive" (on the handle of a check point, he is represented by D).
Starting after that hardly anyone can guarantee, and, in practice, most of these experimenters mission is simply out of order.In general, no wonder they say motorists that to start the car with a pusher on the automatic transmission is not possible.Therefore, in order to avoid costly repairs that "take" you have a few hundred thousand, it is better not to use this method as a last resort and take a taxi.
Note
worth noting that start the car with the pusher unsafe even for a manual transmission.The fact is that after these actions, you risk to break the timing belt.But it is fraught with costly repairs engine.So if you have a car with the "mechanics", use this method of starting the engine only in extreme cases, as in the case of "automatic" do not use it at all.
Conclusion So, we figured out how to start the car with the pusher and what dangers await motorists with automatic transmission after such an engine start.Finally, we note that for a successful start in the winter better every day after a visit in the evening to remove the battery and put on a night in a warm room.
