repair nearly finished.New wallpapers, suspended or false ceilings, plastic windows ... There was one small thing - to lay linoleum, arrange the furniture and you can celebrate the end of the process.But how to do it properly, to avoid having to later regret hasty decision to do the job yourself?What you need to remember in what order to act?
How to lay linoleum on the floor: a preparatory stage
To linoleum was Fitted with properly, was not going to "accordion", not stretched and not up near the threshold, it is necessary to comply with simple rules.A significant role played by the quality of the coating.Cheap (without base) is not only problematic in the packing, but also very inconvenient in operation.However, before closing any kind of linoleum floor, should prepare the surface.All cracks and irregularities need to raze.It is better to use the self-leveling screed, which is within a few minutes to make the floor flat and smooth.The only requirement - carefully prepared solution without lumps and clean surface.Once the screed has dried, it should be thoroughly promesti brush to remove the smallest debris.Otherwise it will be visible through the coating.
How to lay linoleum without wrinkles and folds?
In order to cover the styling does not become a real torture, is necessary before mount it under the plinth, pre-roll into an empty room.Within a few days he gradually straighten.After all the bumps are gone, you can start packing.If you do not know how to lay linoleum, do not worry!This is no big deal.You will need a sharp knife to cut the coating.It can be purchased at any DIY-store, or wherever you buy himself linoleum.You may need the help of someone in the family or friends.It is necessary to distribute the linoleum from the middle and gradually moving to the walls.Make sure that there are no waves or wrinkles.Secure the cover with a knife and cut it to 2-3 cm above the floor near the wall.Do it better with a ruler, then the probability of ruin will be much lower than the linoleum.After the coating is uniformly distributed on the floor and cut off, it can be fixed with the help of the plinth.That's it.Linoleum your bed!
How to lay linoleum on the wooden floor?
Before you distribute the coating on the wooden floor, you must carefully prepare the surface.All the bumps better handle a plane and sanded.Cracks putty, or if too many of them to close the floor with plywood or fibreboard.Thereafter, if the joints are imperceptible to the touch, and linoleum on the basis of foam or felt, it can be laid on the floor.If he is without foundation in this case you can use the lining under the laminate.It will create an additional layer and hide minor irregularities.Now that you know how to lay linoleum, and can do it yourself.
