Today, almost every third motorist trying to revive the spark plug, which outlived his own.This is done in order to save as well as due to a sudden release of machine failure in the path.There are several ways on how to clean spark plugs.Despite the fact that to make it simple, you need to follow some rules.
How can we clean the spark plugs
There are many tools that are used for cleaning.The most popular of them - this is a common sand paper and brush on the metal.However, such a tool may help only when the amount of the residual carbon and a mixture of gasoline immaterial.It also does not help if the candle was flooded, as they must be pre-dried, and only then to clean.
can try to heat the product to a high temperature.It is recommended to do so until the metal turns red.However, during such manipulation is broken ceramic insulation, so this candle will not serve long, but at 5 000-7 000 kilometers it should be enough.After nakalki deposit and remains of the mixture can be easily removed with a brush metal.
There is also another very interesting and effective way on how to clean the spark plugs with the help of improvised means.To do this, pour detergent into the container, and then dipped in a tainted product, about half of the contact surface facing down (the place where the spark is generated).Hold for about 8-10 minutes, then snuff becomes soft, it is possible to remove even a toothbrush.
How to clean the spark plug
So, we have figured out that you can use for cleaning.And now I would like to say a few words about the process itself.You have to understand that it is often after cleaning 100% efficiency is not restored, but the efficient operation of the engine can still be secure.
use of household chemicals can effectively clean the soot from the candle, and restore the spark gap so that the engine worked steadily.For this candle held within a day in a special solution and then mechanically purified electrodes is then reduced mezhiskrovoy gap and set everything in place.
But the most effective way to clean, which we have not mentioned is the use of a device called sandblasting.In this case, use sand, but then you need to know how to properly clean the spark plugs.To this end, it is desirable to straighten side electrode spark that ensures complete cleaning of a deposit.
Clean the iridium spark
Currently, not all heard about the variety of spark plugs, and even more so about how they should be carried out cleaning.It should be noted that Iridium products have cost about 2 000 rubles per set.However, using high-quality fuel, they provide an effective ignition of the working mixture, even at -30 degrees Celsius.
And now a little bit about how to clean the iridium spark plugs.Since damage them just sandpaper should be completely excluded.The same applies to detergents and other "chemistry."Here it is recommended to use the compressed air at a pressure of 6 atmospheres.Also suitable and sand blasting, but you need to be extremely careful.During cleaning, sand candle must be periodically rotated to better remove abrasive.
A few good ways
There are many ways on how to clean the spark plug, but not all of them are suitable.Therefore, almost half of the methods fully displays the candle down, we do not need.Today, ultrasound is used to break down a deposit, but the performance drops by about 30%, and it is fraught with poor ignition of the working mixture at temperatures below zero.
In most cases, use the special preparations that contain in its composition chemically active substances.Most often they are used to clean the injectors.Candle placed around day special fluid then purified Yorshik and purged with air.The result is quite good.It also has a place soaking in gasoline or solvent, followed by purification by means of brushes.A good method, but it rezultativen only as long as the deposit has not clearly expressed.
Instead of conclusion
So we looked at how clean the spark plug in different ways, each of which is used today.But it is worth noting that not all of them provide the desired result.Some do not allow the spark plug to operate as efficiently as before, but others are so expensive that it is easier to buy a new set.
best option has been for many years, it remains sandblasting.The results after a cleaning optimum.Candle almost completely cleared of various kinds of dirt and restore their former characteristics that we, in fact, necessary.You can use household chemicals, but the long-term operation still do not expect the maximum is 10,000 kilometers.With regard to the iridium spark, then, according to the manufacturers, they can serve as a very, very long time, but only at the high-quality fuel.
