Every self-respecting man at least once in their lives to make repairs in the apartment itself or with the help of specialists.One of the most complex buildings in the alteration becomes a bathroom, and not just because it is related to plumbing work.The bathroom is preferable to coat the ceramic tile, and this is a serious professional challenge, and if the landlord takes on her own, then his honor and praise.To help the wizard offers expert advice as to drill tile, not to beat and not to spoil it.
First, determine which holes are drilled before placing it on the wall, and which - after.Most modern bathrooms have sockets for a hair dryer or electric shaver;In addition, the necessary cutouts for taps over the bath and wash basin.All of these holes must be done in a tile to its placing on the wall.Directly to the wall tile is drilled through the preparation of a hardware mirror, cabinets, shelves, racks, etc.
Before you start practicing how to drill tile, you need to have on hand all the necessary tools and accessories:
- Pencil (or marker) and a tape measure to mark.
- drill.
- Set pobeditovye or diamond bits for drilling on the tile.
- drill or stylus on the tile (8-10 mm).
- Concrete drill bit for drilling holes in the wall itself (6 mm).
- Equal piece of plywood larger than the size of the tiles to enclose it under the tiles during drilling.
- bottle with water.
Holes outlet valves and outputs are made directly in the process of lining.When he reached the place where there should be a tile with a hole, do the layout from the adjacent left and bottom tiles measure the distance to the center Escutcheon, for example, and note it on the tiles already laid on a piece of plywood.Important!Sheets of plywood (thickness not less than 10 mm) must be smooth and lie on a flat surface - while tile does not crack.In a note, you can stick a piece of paper tape, to prevent slipping of the tool.How to drill?Tile firmly presses his left hand;in his right hand screwdriver with a pen on the tile with which a hole is drilled in the center of our labels.Then, without moving the tiles to place, change the pen tip with a screwdriver on the crown, put it in the hole and has done to cut a hole we have the right size.Try on a tile to the hole in the wall and install it if they coincide.Tools for drilling must be powerful enough, but include high speed is not recommended - there is the risk to split tiles and damage the crown.From time to time pour a sharp water from a bottle, so your crown last longer and do not wear out.How to drill tile learned.
the question as to drill a tile on the wall, added a caveat.Having made this technology a hole in the tile, you have to go deep into the wall.At this point, do not forget to change the drill bit (or stylus) on the tile to drill on concrete.
And a few words about what the cut tile.At home often use a glass cutter or a "grinder."Glass cutter not all tiles will be mastered, from the "Bulgarian" a lot of noise and dust, and is not safe to work with her.The best option for home repair is a manual tile cutter.A rich selection of various brands represented in this tool building online stores;only need to choose the one that suits you the price and specifications.And to learn how to deal with it is simple.
