Electric drill - this is the tool that has been in almost every home.You can use it to drill almost any material, cut a hole for the lock, mix paint or even cut the metal!
Of course, many of these operations are carried out is not a "pure" tool, and special devices.So, head to drill for metal cutting would be extremely useful if you are fond of performing various kinds of plumbing work.
Some information
With the help of this device in a metal convenient prodelyvat round holes.Do not believe vendors who say, if it is well suited for direct and long cuts.In such a case it would be much preferable to angle grinders.
However, the attachment on a drill "Cricket" gives the opportunity not only to make a hole in a steel or duralumin sheet, but also to process the edges of the special abrasive.The cost of such products is low, most of it is within a thousand rubles.
The principle of
skilled nozzle on the drill for metal cutting is more commonly known under the name of electric shears.Doing different shaped and circular cut-outs, it does the job quickly, without producing too much loud noise.
Metal is processed the better, the better the characteristics of the drill.If you are using a powerful tool with the ability to install high speed, you probably will get a clean, burr-free and chips, slices.The advantage of "Cricket" and similar models is also the fact that the metal sheet is completely deformed.
whom it might be useful?
If you are dealing with cutting and the cutting metal, performing body work or something like that, then head to drill for metal cutting you exactly come in handy.Yes, and for simple jobs around the house, it certainly will do.Since it can be used to easily cut metal up to 1.5 millimeters thick, it will be a lot of work.
"barrier to entry"
Unlike complex industrial or household tools, to the nozzle will not have long to adapt.Even a novice can easily be used on a drill head "Cricket" ENKOR, cutting one hour and a half meter metal.
If you have at least some modern drill, then you can easily attach this device to it.In general, it can be concluded that the purchase of the nozzle which is preferred for home craftsmen, as it will pay for itself very quickly.
Some disadvantages
However, do not assume if attachment on a drill for metal cutting is a full replacement to multiple instruments.Like it or not, but the power of this combination of instruments is hardly enough even for the remote comparison with professional electric clippers.
Yes, and supported metal thickness 1.5 mm will not give you the possibility to spend some really serious work.
If no illusions about the performance, such a device it is possible to get to where you want to make some not too resource-intensive crafts for home and garage.In this case, the nozzle will save you a lot of time and money.
