Carburetor - is the main component of all vehicles equipped with petrol engines.This spare part plays a crucial role in the fuel system.It was from her serviceable condition will depend on what the machine be acquired or not.When this item is hammered into the combustion chamber can get too "rich" or "poor" mixture.For motor neither one nor the other liquid is not perfectly fit.Therefore, in order to avoid such troubles, it is necessary to closely monitor and eliminate dirt from the part.But how clean the carburetor?With this question we have today, and we will understand.
Can you make this process yourself?
course, you can.All the work has no any intricate or difficult steps, so that cleaning can cope with even the novice.Moreover, by the time this process is not so time-consuming that soon will do everything yourself than to drive the car to the car wash.
Tools
Before you clean the carburetor (2109 or GAS 24 - it does not matter, actually it does not change), you should prepare all the necessary tools.To work we will need an empty container 1-2 liters, a screwdriver, a minimum set of wrenches and a socket wrench and a special solvent.
Where to start?
Before you clean the carburetor VAZ, "Toyota" or BMW (car brand from the stages of work do not change), you should first take it off.This we now do.So the first thing we find this spare.On all the machines it is located under the hood near the air filter.There you'll see the cover that holds the carburetor system.First, unscrew 4 screws and unplug the cable from the details of the gas and the fuel hose.
After the specified part dismantled from the vehicle, it should be dismantled.To do this, we extract the solenoid valve, the jet and the axis of the floats.When the cover is removed, you will see a rubber gasket.But before you clean the carburetor, carefully inspect the condition of the seal.If it is damaged, replace the gasket with a new one.
Next Turn off the fuel valve and bolts (on all machines of four pieces) securing the starter, and then the lid.Unscrew the cap and at this stage, remove the filter.
So how to clean the carburetor can own, we can not accept this part in the workshop.After dismantling take a special liquid for cleaning carburetors and pour it into a small saucepan.Then we drop the item and scored to put the container for a day cleaned.Boil while nothing.Filter temperature and the solution should be room temperature.The next day we take out the element from the tank and using gasoline wipe the dark patina that has formed there in 24 hours.We wait until they dry, and proceed to the assembly.Installation of this part is made in a similar manner.Another important piece of advice: do not forget about the seal.If it is cracked, replace immediately with a new one.
So, we figured out how to clean the carburetor car yourself.
