By choosing pipes for baths should be approached very seriously, pick up the good stuff and make sure the quality of the device.If you treat it carelessly, it can be subjected to the construction of a fire hazard, and cleaning with this product will be a problem.Even the climate in the sauna room depends on the correct choice of the pipe.
Choice pipe for bath: ceramic or steel?
Today, a huge range of specified products can confuse finally each person.Most often selected steel pipes for the bath, since they are able to withstand huge temperature.This is an important property during construction.
But Flue pipe for bath ceramics inferior to the popularity.Due to the fact that it has a high weight, even better durability.There are also so-called asbestos-cement pipe.This material is a bit of positive feedback.The pipe for the furnace to the bath of asbestos can burst - and then the fire happened.
If we talk about the isolation, the increasingly choosing, foil, as it does not emit harmful substances when heated.
pipe to less heat, to do the so-called "sandwich".He did so:
- taken tubular steel;
- basalt placed on top of it;
- then a second outer loop of stainless steel.
Arranged this way the design is not very hot.The fact that basalt withstand very high temperatures, and there is no risk of fire and when it is heated it does not emit noxious odors.This tube is called "warm", because it does not cool down very quickly.This device is the most effective for the bath.Also, the outer pipe is practically not heated - and thus the risk of fire is very small.And last but not least, this product improves the operation of the oven, even thrust would be better, since there are no barriers.
How to protect the building from fire?
If you suspect that the pipe is still hot, then you need to check the temperature at the surrounding material.You can splash water on the apron or touch the touch board.If, however, the soul is restless, just in case the wind pipe can be flexible with asbestos.To do this it is necessary so to be sure there was a small air gap.It is also necessary to implement the protection of the outer edge of the pipe for the bath of water, hidden under a metal fungus.
Shoe
pipe to clean it there are many different ways - from brushes to chemicals.But the problem arises when the stove pipe and a proprietary overlapping.Here the problem is not resolved with the brush.Clean the pipe can be specified as:
- should be poured into the tube a couple of liters of boiled water;
- then use the stove for a long time.
After that soot will soon come out, but the smell should not be afraid - they lost because of the high temperature.
Thus, the material for the pipe should be chosen less fire hazard, durable and low mass.Under these requirements perfectly suited steel.All its advantages have been described above.Wire insulation is better, foil, and for best results to build a "sandwich".And for reinsurance can be used asbestos.
